0
  • Customized O3 Lite Air Unit Easy to use for beginners and professionals UAV
  • Customized O3 Lite Air Unit Easy to use for beginners and professionals UAV
  • Customized O3 Lite Air Unit Easy to use for beginners and professionals UAV
  • Customized O3 Lite Air Unit Easy to use for beginners and professionals UAV
  • Customized O3 Lite Air Unit Easy to use for beginners and professionals UAV
  • Customized O3 Lite Air Unit Easy to use for beginners and professionals UAV

  • Customized O3 Lite Air Unit Easy to use for beginners and professionals UAV

  • With an integrated fuselage design, it is lightweight and aesthetically pleasing, and the flight control is handy. Set the lights with the push of a button to make a statement. Quick-release battery, built-in auto-discharge module, and support for Type-C fast charging. It adopts the official customized O3 image transmission, 155-degree ultra-wide angle, and supports 4K/120FPS shooting, allowing you to enjoy flight creation.
  • $ 945 - $1225
  • 0 in Stock NowJR-IF1228

  • Group

    JR-IF1228

    JR-IF1229

  • QUANTITY

  • Contact Online

JR-IF1228

Rack: Ring type

Motor diagonal distance: 81mm

Motor: Defender 16 1103

Propeller: Defender 16 1809-3

Weight: 128g

Dimensions (L×W×H): 121×117×47mm

Maximum horizontal flight speed: 55km / h

Maximum altitude take-off: 2000m

Maximum hovering time: about 6 minutes

Maximum cruise time: about 5 minutes

Maximum wind resistance level: Level 3

Working environment temperature: -10°C—40°C

Number of antennas: Dual antennas

JR-IF1229

Rack: Ring type

Motor diagonal distance: 97mm

Motor: Defender 20 1204

Propeller: Defender 20 2020-3

Weight: 170g (take-off weight with dedicated battery)

Size (L×W×H): 135×136×52mm (with battery)

Maximum horizontal flight speed: 75km / h

Maximum altitude take-off: 2000m

Maximum hovering time: about 8 minutes

Maximum cruise time: about 6 minutes

Maximum wind resistance level: Level 3

Working environment temperature: -10°C—40°C

Number of antennas: Dual antennas

You May Be Intersted
Superior power performance, adapt to complex water conditions Multi-task loads, wide adaptability Strong compatibility and support modificationHigh-end configuration, strong detection capability Underwater drone

Sonar scanning Lighting system HD 6 thruster layout Most wave sonar manipulator Jiangtun Ⅳ-C Underwater drone

The Jiangtun Series ROV from DEEPINFAR is a leading small-sized ROV in the industry. The Jiangtun Series ROVs have excellent power and anti-current capabilities, along with an outstanding carrying capacity. They can be customized with a variety of sensors and payloads based on different operational requirements, making them suitable for rescue and salvage operations, emergency response, and other tasks in inland waterways and coastal marine areas.

Inquiry
Dynamic Positioning System Real-time 3D Imaging Sonar Cable detector Five-function master-slave manipulator, etc Underwater drone

Super stability, multi-task load, support fine operation, support dynamic positioning underwater drone

The Haitun Series ROV from DEEPINFAR is a light work-class ROV with exceptional capabilities, featuring strong maneuverability and payload capacity, capable of diving up to a depth of 1000 meters. Equipped with multiple high-performance electric thrusters, it achieves high-speed underwater movement and has a certain level of current resistance. The Haitun Series also offers a wide variety of options, allowing for quick customization with sensors and tools to suit different application scenarios.

Inquiry
It can be used for detection, dredging and sewage suction operations of urban pipe networks with pipe diameters ranging from 700mm to 3000mm

It is an underwater special operation robot that integrates detection, dredging and sewage absorptio

The robot is equipped with three ultra-clear 4K detection cameras to realize the monitoring of no dead angles in the pipeline and monitor the situation of the cutter suction device; Equipped with sonar and metering devices, it can accurately measure the thickness of underwater silt, and present the effect and location of dredging in real time; Equipped with a detachable cutter suction device, the cleaned dirt can be discharged to the ground through the pump truck while dredging. The equipment is controlled by a central control box or a mobile device, which is easy to carry and monitor the working status and dredging operation of the robot anytime and anywhere. The use of this equipment can greatly improve the work efficiency of pipe network dredging operators and the economic benefits of the operating unit, solve the problem that manual dredging cannot be effectively desilted under complex working conditions, and eliminate personal injury accidents in high-risk operating environments.

Inquiry
Unmanned Helicopter Smart emergency response, sailing against the wind

Unmanned Helicopter Heavy load transportation JR-FC1217

JR-FC1217 is a heavy-duty transport unmanned helicopter suitable for emergency rescue applications. It has good endurance and load capacity, and can realize the transport of materials and fixed-point delivery by hanging and dropping. By carrying photoelectric camera and mapping camera, it can be used for target reconnaissance, shooting and positioning. Equipped with base station module and satellite communication system, it is widely used in emergency communication coverage in disaster areas and can also be accessed to shouting, lighting and other modules.

$619200 - $619500
Agricultural spraying, spraying, sowing and fertilization, with a load of 10 kg, plant protection drones UAV JR-JAS75

Agricultural spraying, spraying, sowing and fertilization, with a load of 10 kg, plant protection drones UAV

JR75 Series Quad-copter 10-22KG Agricultural UAV FPV Camera LED Lighting No fear of dust and pesticides, full body can be water washed, whole body sealing,corrosion resistance, scratch resistance, waterproof and dustproof Integrated injection molding body,multi-chain skeleton structure, double strength, double durability, built-in power distributor Folding parts using injection molding process, the arm composite plastic components, more tight, more durable High strength carbon fiber material, composite plastic component,threaded connection, more stable, more solid

$6200 - $7800
BLITZ E80 4-IN-1 ESC for more power and reliability UAV

Protected Propellers for indoor and outdoor use UAV

Designed for professional-grade cinematography and can be equipped with Komodo/ZCAM/BMPCC cameras. The protective ring design makes it safer to shoot in large scenes such as large shopping malls, stadiums and concerts.

$2945
Pro Electric UAV Six rotor unmanned aerial vehicle platform

High precision nuclear radiation monitoring Pro Electric UAV

JR1209 Pro is a six-rotor UAV platform with universal mounting capability, which can carry different payloads to complete normal inspection, 2D / 3D aerial survey, special equipment transport and other tasks, and the platform has full autonomous flight capability. By carrying reconnaissance cameras, aerial photography equipment and emergency disposal devices, it can be widely used in inspection, reconnaissance and other fields.

$184980
Unmanned helicopter Tail rotor motor direct drive, main rotor driven by fuel engine

Unmanned helicopter Born for efficient homework JR-FC1216

JR1216 unmanned helicopter adopts the traditional single-rotor helicopter layout, the tail rotor is driven by motor directly, the main rotor is driven by a fuel engine, and the airborne equipment is powered by an integrated generator and battery. The rotor control structure has the same principle as the traditional helicopter, showing excellent flight performance, including high stability and maneuverability. Compared to multi-rotor, the propeller efficiency is higher and the endurance is longer. Support beyond visual range flight, in the case of signal relay can cope with complex geographical environment tasks, such as low altitude operations in mountains and over the sea

$2776640
Shop by Categories