0
-
Police anti stab suit Anti riot equipment level 3 bulletproof suit
- The anti stab suit is used to protect the body from the attack of sharp tools, sharp tools and knives. The anti stab clothing is composed of an outer coat and an anti stab inner layer. It is overlapped with adhesive buttons and can be flexibly adjusted according to the size of the wearer's body. It has excellent softness, light weight and thin thickness, and can reduce human body load. It is designed with modern aramid stab resistant material technology, and combines ventilation, heat dissipation and tightness adjustment.
- $ 112 - $245
- 0 in Stock NowJR-LR04
-
Group
II
III
IV embedded steel board
kevlar II
kevlar III
-
QUANTITY
- Contact Online
Advantages of II/III grade soft Kevlar fiber inner tank bulletproof vest inner tank: DuPont Kevlar bulletproof fiber imported from the United States ensures that the bulletproof vest is not punctured within the specified level, while meeting the dual needs of wearing and safety. It meets the basic movements of the human body and is suitable for long-term wearing. The bulletproof effect of the same level is slightly higher than that of PE fiber inner tank
Bulletproof level: II (anti knife, anti 54 lead bullet)
III(anti knife and anti 79 lead bullet)
Protective area: 0.3 square meters (covering major organs) Product specifications: One size fits all
External material: Made of rainproof and bulletproof vest cover fabric Internal material: Kevlar fiber inner liner
Product weight: II: 3.5KG III: 3.6KG
1: Coat material: selected Gongsi brocade fabric, soft and comfortable, breathable and skin friendly. Soft and durable polyester cotton fabric with mesh fabric for easy air circulation.
2: Coat features: mesh structure provides air permeability and increases the air flow between the vest and the body. The front and rear ends of the waist are easy to disassemble and adjust the size from multiple angles to fit the body and move freely; The internal detachable chip is convenient for cleaning and care.
3: Color: black, army green, Khaki
4: Effective protection area of anti puncture chip: ≥ 0.29 ㎡
5: The stab proof layer structure is a whole piece, no splicing or overlapping structure
6: Protective structure: 15 layers of aramid impregnated woven fabric + 4 layers of anti puncture special foam
7: The mass of the front and rear target pieces does not include the protective cover of the anti puncture layer: L size ≤ 1.82kg
8: Weight of front and rear stab resistant layers: ≤ 2.65kg
8: Stab resistance: type a stab resistant clothing uses D2 tool and D3 tool respectively, with impact energy of 24J ± 0.5j, and the stab resistant clothing will not be penetrated when it is effectively stabbed
9: The static water pressure resistance of the protective sleeve material of the stab proof clothing shall reach grade 3 or above specified in GB / T 4744-2013
10: Wearing flexibility: the anti stab clothing is flexible, beautiful and easy to wear and take off. After wearing, the two arms can move freely, and the human body can kneel, jump, squat, run, pitch and rotate without obvious restrictions
11: Ambient temperature: - 20 ℃ ~ + 55 ℃
12: Executive standard: ga68-2019 anti stab clothing for police up to 24J ± 0.5j impact energy (NIJ 0115.00)
13: Stab proof performance: type a stab proof clothing shall be applied with D1 tool and impact energy of 24J ± 0.5j to effectively stab the stab proof clothing without penetration.
