0
  • The system adopts the integrated design of detection and attack, scientifically combines the UAV detection and countermeasure system, and is mainly used for the detection, identification and interference countermeasures of the UAV in the flight state
  • The system adopts the integrated design of detection and attack, scientifically combines the UAV detection and countermeasure system, and is mainly used for the detection, identification and interference countermeasures of the UAV in the flight state

  • The system adopts the integrated design of detection and attack, scientifically combines the UAV detection and countermeasure system, and is mainly used for the detection, identification and interference countermeasures of the UAV in the flight state

  • The system adopts the design of detecting and fighting as a whole, scientifically combining the drone detection and countermeasure system, mainly used for detecting and recognizing the drone in flight status and jamming and countermeasure, which can make the drone hovering in place, forced landing or returning to the flight, effectively preventing the drone from entering into the defense zone and guaranteeing the safety of low altitude airspace, with good detection and countermeasure performance, long working distance, no need to be guarded by the personnel, and automatically carrying out the detection and countermeasure of the drone.
  • $ 263580
  • 0 in Stock NowJR-MD1134

  • JR1134

    JR1134

  • QUANTITY

  • Contact Online

Advantages：No need for personnel to attend intelligent interference mode, can increase the energy storage battery.

Description：Product function: Mainly used for the detection and identification of drones in flight and interference countermeasures, the internal energy storage battery can be added to meet the application needs of multiple scenarios. Detection parameters: frequency

Application Fields：Low altitude protection in key areas such as power plants, petroleum and petrochemical, aviation and airports, public security and judicial, supervision sites, and activity sites.

• The device can continuously monitor, counteract, and record the airspace of the defense zone around the clock, maintaining stable operation even in harsh weather conditions such as fog and thunderstorms.

• The system supports the setting of defense plans and automatically and intelligently executes preset plans. It can coordinate with detection equipment to carry out coordinated strikes outside the defense zone.

• The device can be customized with multiple modules and multi-array combinations according to customer needs. The antenna angle of a single device can be customized from 10° to 180°, meeting various jamming requirements.

• The device emits high-power jamming signals in the same frequency bands (1.5G, 2.4G, 5.8G) to suppress drone control signals, with a jamming radius of up to 1000-5000 meters.

• High-gain directional flat panel antennas are used, with single-channel output power of 25-30 watts, focusing energy for more precise target strikes.

• Strong resistance to external electromagnetic fields and high expandability.

• Internal energy storage batteries can be added to meet the needs of various application scenarios.

• Multiple devices can be combined for spectrum-coordinated jamming operations (e.g., if a drone intrusion is detected from the north, the northern jamming module can be activated separately for a strike).

• Whitelist and blacklist: The same orientation, frequency band, brand, and model of drones can be marked with whitelist and blacklist tags.

• Unattended mode: After activating full automatic defense, the system can enter unattended mode for autonomous detection. (When equipped with a strike system, the strike mode is automatically activated).

• Remote controller recognition: Can recognize ≥ 12 different non-DJI model drone remote controllers simultaneously.

• Precise identification: Can accurately identify the drone model and unique electronic fingerprint, and simultaneously recognize ≥ 35 different drone brands and corresponding ID numbers (identity verification).

• Advanced warning capability: Drones can be detected without takeoff, and ground power-on can detect with advanced warning capability.

You May Be Intersted
Disabling the drone's satellite navigation, wireless remote control, and wireless video transmission links forces the drone to hover in place, land, or return to the original route. Compared to omnidirectional jamming, the strike is accurate

Compared to omnidirectional interference, the targeting is more precise, the impact on the surrounding environment is minimal, and the reliability is higher.

The device is mainly used for signal interference of UAV, and can be combined with the detection equipment of UAV to form an intelligent linkage defense system.

$97110
The optoelectronic tracking system completes the initial alignment of the target according to the target position information provided by the search system, and then searches for the target near the initial alignment area

It is composed of a tracking turntable and a photoelectric chamber, which is equipped with an uncooled infrared focal plane detector, a high-definition visible light camera and an image processing board

The infrared thermal imaging optoelectronic equipment is composed of a tracking turntable and a photoelectric chamber, which is equipped with an uncooled infrared focal plane detector, a high-definition visible light camera and an image processing board. The photoelectric tracking system completes the initial alignment of the target according to the target position information provided by the search system, and then searches for the target near the initial alignment area, and the suspicious target can be confirmed by automatic identification or manual designation in the search process, and then turns into the target automatic tracking working mode, so that the photoelectric sensor boresight axis and the radio frequency interference antenna installed on the tracking turntable can be aimed at the target in real time.

Inquiry
When the UAV enters the defense area, the suspicious link signal is monitored and identified JR1178 Owl Defense System

Scientifically integrate four types of anti-UAV systems: radio spectrum detection, radar detection, navigation decoy, and electromagnetic interference JR-MD1178 Owl Defense System

Owl anti-UAV defense system uses radar + radio detection + omnidirectional electromagnetic interference + navigation decoy system architecture, through integrated structural design, to build a three-dimensional defense system. The radio spectrum monitoring system collects the surrounding radio signals in real time and scans them according to the configured frequency bands. When the UAV enters the defense area, the suspicious link signal is monitored and identified, and at the same time, it cooperates with the radar detection system to confirm, provides information such as the target working frequency band and distance, and the jamming system transmits electromagnetic suppression signals according to the plan to interfere with the UAV's image transmission and navigation signals; Or through the navigation deception system to transmit low-power regenerative navigation satellite signals (power not more than 10dBm), invade the UAV navigation system, set up a no-fly zone, deceive and confuse the UAV's navigation terminal, so that it cannot fly into the protected area, and ensure the low-altitude safety of the area.

Inquiry
JR1193 Knapsack frequency jammer (AB pack)

JR1193 Knapsack frequency jammer (AB pack)

backpack frequency interference system, suitable for use in special environments (small space, no power supply, vehicle interferometer can not enter the place). It integrates advanced digital radio technology, integrates electronic countermeasures, digital signal processing, power amplification, special antenna design and other advanced technologies in one, and can adapt to the needs of RCIED remote control device explosive field disposal, technical detection and monitoring, hostage rescue and other work.

$88810
Adaptable Low Cost High Refresh Rate Strong Recognition Ability

The RF scan 3D security radar adopts 3D scanning technology, aiming at the three-coordinate three-dimensional space surveillance of low-altitude, ground targets, all-round and high-elevation coverage

The RF scan 3D security radar adopts 3D scanning technology, aiming at the three-coordinate three-dimensional space surveillance of low-altitude, ground targets, all-round and high-elevation coverage, and is mainly responsible for the real-time reconnaissance of aircraft, ground personnel, vehicles and other targets in the surrounding area, finds and tracks the target, and output or report the target information to the specified user. The radar supports three erection modes: fixed, vehicle-mounted and portable, and is flexibly suitable for various low-altitude and ground security application scenarios.

Inquiry
Advanced technology system Target range High monitoring accuracy Monitoring distance Strong environmental adaptability Wide range of application

Five-sided array all-round 360-degree detection, the maximum detection distance ≥ 3.0km.

• The phased array system of the radar offers high flexibility and multi-target tracking capabilities. • By controlling the phase of each radiating element, multiple beams can be generated and scanned, enabling the tracking and identification of multiple targets. • Compact and portable, easy to set up, lightweight, and simple to operate. • Maximum detection range is ≥ 3.0km (typical target: DJI "Phantom 3"), depending on the model/environment. • Simple installation and strong usability, with user-friendly terminal software that is easy to learn and use. • High reliability, as the search radar does not require mechanical rotating equipment, avoiding radar work interruptions due to electromechanical failures, thus ensuring higher reliability. • Advanced technology system capable of non-uniform detection, employing different detection schemes for different areas to improve overall detection performance.

$416200
The long-term coherent accumulation technology is used to realize the detection of "low, slow and small" high data rate and high Doppler resolution

The digital receiving and transmitting arrays are used to transmit a wide beam and receive DBF to achieve simultaneous multi-beam

Holographic gaze detection radar, also known as full-time and space-time radar and pan-detection radar, adopts digital receiving and transmitting arrays, transmitting a wide beam, receiving DBF to achieve simultaneous multi-beam, and realizing continuous detection of the entire airspace. The long-term coherent accumulation technology is used to realize the detection of "low, slow and small" high data rate and high Doppler resolution. It is mainly used for the detection, alert and target indication of UAVs, birds, and aircraft in key areas such as airports, borders, and coastlines. It can quickly adapt and process the environment and target type, and continuously "flood illuminate" the entire field of view to form a three-dimensional space of the target

Inquiry
Integrated detection and countermeasures, small, light, full-band detection, full-band positioning

UAV automatic detection, identification and interference detection and combat integrated equipment, 360° all-round passive passive detection

JR1136 UAV defense system has the integration of detection and attack, detection and countermeasures, smaller, lighter, full-band detection, full-band positioning, in the 50MHz-6GHz range of UAV signals can be identified and positioned. The UADS-ZG42 UAV defense system is composed of intelligent spectrum detection and radio interference integrated host and operating terminal, which is easy to install, simple to use, and flexible to configure in various scenarios.

Inquiry
Shop by Categories