0
  • Easy Installation, Wide Application High Power Broadband Power Amplifier Integrated Design Digital Interference Source Design
  • Easy Installation, Wide Application High Power Broadband Power Amplifier Integrated Design Digital Interference Source Design
  • Easy Installation, Wide Application High Power Broadband Power Amplifier Integrated Design Digital Interference Source Design
  • Easy Installation, Wide Application High Power Broadband Power Amplifier Integrated Design Digital Interference Source Design
  • Easy Installation, Wide Application High Power Broadband Power Amplifier Integrated Design Digital Interference Source Design
  • Easy Installation, Wide Application High Power Broadband Power Amplifier Integrated Design Digital Interference Source Design
  • Easy Installation, Wide Application High Power Broadband Power Amplifier Integrated Design Digital Interference Source Design

  • The full-frequency jamming device is a software-defined jammer, which can customize the jamming frequency and jamming bandwidth according to the mainstream drone frequency bands, and support independent or combined output of multiple jamming channels. The full-frequency jamming equipment interferes with the drone's satellite navigation signal or blocks the communication link between the drone and the remote control by transmitting electromagnetic waves, so that the drone has the effect of forced landing or return.
  • $ 3840
  • 0 in Stock NowJR-HN29
  • GROUP

    29

  • QUANTITY

  • Contact Online

Easy Installation, Wide Application

It can be installed with a fixed pole, or can be quickly erected with a tripod

High Power Broadband Power Amplifier

High-power broadband power amplifier adopts GaN broadband process

Integrated Design

The whole machine is composed of modules such as jammers, intelligent variable-speed PTZs and mounting brackets, with a high degree of integration

Digital Interference Source Design

Digital interference sources support various modulation forms, effectively dealing with various consumer drones and unconventional drones

Full-band Interference

It has full-band interference capability, covering most of the drone communication and navigation frequency

Interference Distance

≥3km(0.1W radiation source)

Interference Frequency Range

The interference channel output can be arbitrarily set in the whole frequency band

Inteference To Signal Ratio

≥10:1

Interference Angle

360°(PTZ)

Communication Interface

1 RJ45、10M/100M/1000M Adaptive Ethernet port

Power Supply

AC220V±10%,50Hz

You May Be Intersted
Active phased array radar using MIMO systems and DBF technology can accurately give trajectory information such as azimuth, distance, and velocity of the target

can accurately give the target's azimuth, distance, speed and other track information.

Radar is an active phased array radar that adopts MIMO system and DBF technology. It is mainly used for the detection, warning and target indication of pedestrians and vehicles in the border, perimeter, checkpoint, military base and other key areas, and can accurately give the target's azimuth, distance, speed and other track information.

$58280
High Positioning Accuracy Strong Penetration Indoor Structure Simulation Reconstruction Multi-target Real-time Positioning

It can penetrate non-metallic obstacles such as building walls, detect multiple personnel targets behind them, and quickly obtain information such as two-dimensional coordinates, the number of targets, and indoor structures.

Two Dimensional Through Wall Radar CE200 is a two-dimensional positioning penetrating reconnaissance equipment, which can penetrate non-metallic obstacles such as building walls to detect multiple personnel targets behind them, and quickly obtain information such as 2D coordinates, quantity of targets and indoor structure.

$2090
The device can identify the operating frequency and distance of the known UAV in the library, has lateral functions

passive detection, direction measurement, distance and identification of drones within range. For more than 95% of the market mainstream drone detection radius distance up to 3-5km

passive detection, direction measurement, distance and identification of drones within range. For more than 95% of the market mainstream drone detection radius distance up to 3-5km

$99880
The system is easy to operate, has a wide range of defense, and can be networked and controlled, and can be operated continuously. multispectral imaging ranging photoelectric

Round-the-clock, full-screen, all-time automatic fast locking and precise tracking with a multispectral camera system

Multispectral imaging ranging photoelectric, tracking, prevention and control integrated system, integrated uncooled long-distance passive infrared thermal imaging detector, telephoto visible light fog-transparent high-definition network camera, intelligent identification module, servo heavy-duty PTZ, Beidou positioning in one, to achieve multi-spectrum, multi-channel day and night complementary imaging, in low illumination, bad weather, night 24 hours day and night monitoring. Through the integrated prevention and control platform, it can remotely carry out automatic or manual rapid and effective disposal of suspicious targets, which is easy to operate, has a wide range of defense, and can be networked for control and continuous operation.

Inquiry
4 low-band antenna interfaces are reserved, and multiple sets of programmable TTL bidirectional interfaces (GPIOs) are provided, which can be used as operation buttons and various control outputs

2dBi dual-frequency omnidirectional antenna, detection radius up to 2km, wide voltage low power consumption.

Both omnidirectional detection antenna and directional direction finding antenna have independent input ports, which can automatically switch between omnidirectional and directional antennas under different states. Four low-band antenna ports are reserved to provide one high-current drive output, which can drive alarm devices such as sound and optical vibration when needed.

Inquiry
The measuring terminal uses the radio spectrum monitoring system to passively intercept the image transmission signal and remote control signal between the UAV and the remote control to realize the passive detection of the UAV

The detection end passively intercepts the signal between the drone and the remote control to realize the detection of the drone

The detection terminal uses the radio spectrum monitoring system to passively intercept the image transmission signal and the remote control signal between the UAV and the remote control to realize the passive detection of the UAV. The strike end is mainly for the compulsory control of the UAV or the flying model in the flying state, and the contact between the UAV and the remote control person is cut off at a distance. The interceptor can force the UAV to land or return to the air to ensure the safety of the low-altitude airspace in the region.Cut off all signal communication between the drone and the controller, and the ground controller of the drone can not receive aerial videos and pictures. The drone is unable to locate, forcing the drone to land, hover, or turn back.

$52050
JR1193 Knapsack frequency jammer (AB pack)

JR1193 Knapsack frequency jammer (AB pack)

backpack frequency interference system, suitable for use in special environments (small space, no power supply, vehicle interferometer can not enter the place). It integrates advanced digital radio technology, integrates electronic countermeasures, digital signal processing, power amplification, special antenna design and other advanced technologies in one, and can adapt to the needs of RCIED remote control device explosive field disposal, technical detection and monitoring, hostage rescue and other work.

$88810
Lightweight and Portable Unattended Multi-dimensional Accurate Detection Advanced Technology System

Low-altitude surveillance radar is a 3D space surveillance radar for low-altitude, small targets, all-round, high-altitude coverage areas

Low-altitude surveillance radar is 3D space surveillance radar that aims at low-altitude small target, all-around, high elevation coverage area. It is mainly designed for real-time detection and tracking of air vehicle, ground human and vehicle target. Then target information will be transmitted and reported to management and control center. It can be installed by long-term fixed, vehicle mounted and temporary deployment, flexibly apply to different application scenarios.

Inquiry
Shop by Categories