0
  • The product is mainly used for drone detection and identification, and can be freely matched with drone countermeasure equipment or decoy equipment to form a defence system
  • The product is mainly used for drone detection and identification, and can be freely matched with drone countermeasure equipment or decoy equipment to form a defence system
  • The product is mainly used for drone detection and identification, and can be freely matched with drone countermeasure equipment or decoy equipment to form a defence system

  • The equipment is mainly used for UAV detection and identification, and can be freely matched with UAV countermeasure equipment or deception equipment to form a defense system.
  • $ 7780
  • 0 in Stock NowJR-MD1116
  • GROUP

    JR1116

  • QUANTITY

  • Contact Online

Advantages:Detection of a wide range of drones; easy to install equipment, high level of protection, easy to set up

Description:It is mainly used for drone detection and identification, and can be freely matched with drone countermeasure equipment or decoy equipment to form a defence system.

Application Fields:Important locations such as airports, security agencies, troops, large events, concerts, important meetings, government offices, anti-terrorism areas, etc.

The device adopts the combination of analog RF technology and modern digital signal processing technology, with built-in RF analog front-end, secondary frequency receiver, high-speed A/D converter and digital signal processor, optimized design for the radio frequency bands commonly used by civil drones and embedded with a large number of practical codes, which overcomes the high false alarm rate, high volume, high power consumption and inherent drawbacks of requiring high-performance processor support, with high cost-effectiveness, low false alarm rate and high power consumption, and the system has a high cost-effectiveness, low false alarm rate, high power consumption and requires high-performance processor support, It overcomes the inherent drawbacks of high false alarm rate, large size, high power consumption and the need for high-performance processor support of the spectrum meter scheme and SDR scheme commonly used in this field, and the system has high cost-effectiveness, low false alarm rate, high integration and high flexibility.

Adopting secondary frequency conversion and IF digital processing technology, it has the advantages of both traditional analog receivers and modern digital receivers.

Effective for most civilian drones, including domestic and foreign mainstream brand drones and various DIY assembled drones, especially suitable for all kinds of traversing aircraft.

Extremely high sensitivity, when using 6dBi antenna, the detection distance can generally reach more than 70% of the UAV's mapping distance; when using 3dBi antenna, the detection distance can generally reach more than 50% of the UAV's mapping distance.

RF front-end with professional limiter, can work normally near the jammer without damage.

Extremely low false alarm rate, especially in complex electromagnetic environments, compared with other devices that generally use spectral feature comparison, more false alarm rate advantage.

Very low average power consumption, averaging only 5W at peak performance, 2.5W in low-power mode, and 0.2W in standby mode.

Work-grade environmental adaptability, allowing stable operation in ambient temperatures of -40~+70℃.

In synchronized mode, multiple units work together with the data processing unit to achieve the direction finding function.

With expansion interface, can be connected to the IFF enemy identification system to realize the enemy identification function.

Low cost, cost-effective, small size, weight only 4.5KG.

You May Be Intersted
High Detection Probability Threat Classification Adjustable Detection Distance Remote Control and Alerting

It can intelligently identify the intrusion of pedestrians and vehicles near the sensor, provide reliable, long-lasting, invisible protection and remote alarm, remote upgrade function, easy installation, no maintenance

Based on seismic detection technology, the intelligent microseismic sensor can intelligently identify the intrusion of pedestrians and vehicles near the sensor, provide reliable, long-lasting, invisible protection and remote alarm, remote upgrade function, easy to install, no maintenance. It can be used all year round in extreme weather conditions. The system is capable of identifying a wide range of threats both above and below ground, including pedestrians, moving vehicles, excavation activities, and more. It can be operated stand-alone or integrated into other security systems for additional protection.

$1950
Easy to Install Multi-sector Antenna Design High Power Broadband Power Amplifier Multi-band Interference

The omnidirectional jammer consists of a multi-channel digital signal source, a high-power broadband power amplifier, a broadband omnidirectional antenna, and a power module

The omnidirectional jammer interferes with the satellite navigation signal of the drone by transmitting electromagnetic waves or blocks the communication link between the drone and the remote control, so that the drone has the effect of forced landing or return. The omnidirectional jammer is composed of multi-channel digital signal source, high-power broadband power amplifier, broadband omnidirectional antenna, power supply module, etc. The jammer supports a variety of modulated signal outputs, and the broadband omnidirectional antenna realizes omnidirectional radiation of high-power interference signals.

Inquiry
Adaptable Low Cost High Refresh Rate Strong Recognition Ability

The RF scan 3D security radar adopts 3D scanning technology, aiming at the three-coordinate three-dimensional space surveillance of low-altitude, ground targets, all-round and high-elevation coverage

The RF scan 3D security radar adopts 3D scanning technology, aiming at the three-coordinate three-dimensional space surveillance of low-altitude, ground targets, all-round and high-elevation coverage, and is mainly responsible for the real-time reconnaissance of aircraft, ground personnel, vehicles and other targets in the surrounding area, finds and tracks the target, and output or report the target information to the specified user. The radar supports three erection modes: fixed, vehicle-mounted and portable, and is flexibly suitable for various low-altitude and ground security application scenarios.

Inquiry
Easy to Install 24/7 Control All-in-one Design Multi-band Interference

By emitting electromagnetic waves, it interferes with the satellite navigation signal of the drone or blocks the communication link between the drone and the remote controller, resulting in the drone forcing the drone to land or return

The Photoelectric Interference Integrated Equipment is mainly composed of a jammer unit, an optoelectronic tracking unit and a servo turntable. By transmitting electromagnetic waves, it interferes with the satellite navigation signal of the drone or blocks the communication link between the drone and the remote controller, so as to cause the drone to make the drone forced to land or return. The interference unit supports independent or combined output of multiple interference channels. The photoelectric tracking unit can be configured with visible light and thermal imaging dual-light cameras, with all-day (day/night) tracking and forensics capabilities.

$3620
It has the characteristics of good detection and countermeasure performance, long working distance, no need for personnel to be on duty, and automatic drone detection and countermeasures

It can make the UAV hover in situ, forced landing or return, effectively prevent the UAV from entering the defense area, and ensure the safety of low-altitude airspace

The system adopts the design of detecting and fighting as a whole, scientifically combining the drone detection and countermeasure system, mainly used for detecting and recognizing the drone in flight status and jamming and countermeasure, which can make the drone hovering in place, forced landing or returning to the flight, effectively preventing the drone from entering into the defense zone and guaranteeing the safety of low altitude airspace, with good detection and countermeasure performance, long working distance, no need to be guarded by the personnel, and automatically carrying out the detection and countermeasure of the drone.

$138800
The equipment is small in size, light in weight and easy to carry, so it can be used as a single soldier or combined with the network to perform coordinated security tasks

The jammer integrates the functions of detection,tracking,forensics,display and control,countermeasures,and networking Unmanned aerial vehicle

JR-TSL1182 UAV inspection and combat integrated handheld control equipment is a set of inspection and combat integrated handheld jammer, which integrates detection, tracking, forensics, display and control, countermeasures, and networking functions

$55490
It can realize automatic detection and identification, positioning and tracking, and interference disposal of intrusion drones

Multi-functional portable watch and play integrated system, full frequency detection + interference + flying hand positioning.

This system is based on the research and development of central control + message level protocol analysis technology, equipped with a UAV integrated control platform, which can carry out real-time monitoring and early warning of the UAV within the detection range, and accurately display the fuselage serial number, model, position, speed, altitude, track, remote control location and other information of the target UAV, so as to carry out countermeasures against the UAV and prevent the intrusion of the UAV.

Inquiry
It monitors the health and safety status of the received navigation satellite signals, identifies and isolates jamming signals and spoofing signals, and improves the security, stability and anti-attack ability of the timing system

Under the condition of full frequency suppression interference, the signal required for accuracy can still be synchronized

• Automatically switch between synchronization hold mode and denial sustain mode based on the status of input signals. • Real-time monitoring of satellite navigation signals at the installation location of the timing equipment • Automatically isolate non-secure GPS L1 and BDS B1 signals . • Monitor output signal status and log alerts for abnormal output signals. • Capable of remotely receiving command . • Resistant to meaconing and spoofing signals.

$12490
Shop by Categories