0
  • The measuring terminal uses the radio spectrum monitoring system to passively intercept the image transmission signal and remote control signal between the UAV and the remote control to realize the passive detection of the UAV
  • The measuring terminal uses the radio spectrum monitoring system to passively intercept the image transmission signal and remote control signal between the UAV and the remote control to realize the passive detection of the UAV

  • The measuring terminal uses the radio spectrum monitoring system to passively intercept the image transmission signal and remote control signal between the UAV and the remote control to realize the passive detection of the UAV

  • The detection terminal uses the radio spectrum monitoring system to passively intercept the image transmission signal and the remote control signal between the UAV and the remote control to realize the passive detection of the UAV. The strike end is mainly for the compulsory control of the UAV or the flying model in the flying state, and the contact between the UAV and the remote control person is cut off at a distance. The interceptor can force the UAV to land or return to the air to ensure the safety of the low-altitude airspace in the region.Cut off all signal communication between the drone and the controller, and the ground controller of the drone can not receive aerial videos and pictures. The drone is unable to locate, forcing the drone to land, hover, or turn back.
  • $ 52050
  • 0 in Stock NowJR-MD1122

  • GROUP

    JR1122

  • QUANTITY

  • Contact Online

Advantages：Portable design, single-operator control, long interference distance, detection radius of over 3000, and interference distance of over 1000 kilometer (depending on the environment).

Description：Quickly detect target airspace, locate drones and enforce landing or expulsion, effectively controlling "rogue" drones.

Application Fields：Public safety, power systems, petrochemical, military sites, airports, prison surveillance

The device integrates the UAV detection and strike functions, and a single device can detect and counter the UAV, providing all-round low-altitude protection anytime and anywhere.

Dual-channel detection and six-channel interference can detect and interfere with most of the commonly used signal bands of drones, covering more than 99% of the drone models on the market.

The device adopts high-gain directional antenna, the detection distance can reach 3000m; Transmit high-power interference signals in the same frequency band, and the interference distance can reach 2000m.

The device can choose to open the detection mode or interference mode, interference mode can make the UAV forced return, forced landing, hovering, picture transmission interference, a variety of action modes can be selected.

Use large capacity rechargeable battery and charging equipment, sustainable work for more than 50 minutes, to ensure long-term use.

Very low false alarm rate, especially in complex electromagnetic environment, compared with other devices that generally use spectrum feature comparison, more false alarm rate advantage.

The device is portable, highly maneuverable and is not constrained by any terrain environment, and can be flexibly deployed to all areas that need to be protected against drone intrusion.

One-click automatic search, intelligent detection, the device detects a suspicious signal after the buzzer alarm.

Timely response to the target detection, rapid signal capture, fog, light rain weather conditions work as usual, strong adaptability to the environment.

You May Be Intersted
Easy Installation, Wide Application High Power Broadband Power Amplifier Integrated Design Digital Interference Source Design

The interference frequency and interference bandwidth can be customized according to the mainstream UAV frequency band, and multiple interference channels can be output independently or combined

The full-frequency jamming device is a software-defined jammer, which can customize the jamming frequency and jamming bandwidth according to the mainstream drone frequency bands, and support independent or combined output of multiple jamming channels. The full-frequency jamming equipment interferes with the drone's satellite navigation signal or blocks the communication link between the drone and the remote control by transmitting electromagnetic waves, so that the drone has the effect of forced landing or return.

$3840
It was developed in response to various security threats brought by the "Black Fly" UAV, and was integrated by the radio spectrum monitoring system and the navigation decoy system

Detection range 3000 meters, decoy range 1000 meters.JR-MD1132

JR1132 UAV defense system intercepts UAV and remote control signals through radio spectrum monitoring and navigation decoy technology, and radiates low-power navigation satellite signals to invade the "black fly" UAV navigation system to achieve interception and control.

Inquiry
It monitors the health and safety status of the received navigation satellite signals, identifies and isolates jamming signals and spoofing signals, and improves the security, stability and anti-attack ability of the timing system

Under the condition of full frequency suppression interference, the signal required for accuracy can still be synchronized

• Automatically switch between synchronization hold mode and denial sustain mode based on the status of input signals. • Real-time monitoring of satellite navigation signals at the installation location of the timing equipment • Automatically isolate non-secure GPS L1 and BDS B1 signals . • Monitor output signal status and log alerts for abnormal output signals. • Capable of remotely receiving command . • Resistant to meaconing and spoofing signals.

$12490
Active phased array radar using MIMO systems and DBF technology can accurately give trajectory information such as azimuth, distance, and velocity of the target

can accurately give the target's azimuth, distance, speed and other track information.

Radar is an active phased array radar that adopts MIMO system and DBF technology. It is mainly used for the detection, warning and target indication of pedestrians and vehicles in the border, perimeter, checkpoint, military base and other key areas, and can accurately give the target's azimuth, distance, speed and other track information.

$58280
Ease of use and variety of scenarios Detection and combat all-in-one equipment

By interfering with the UAV's control system and communication link, the UAV is forced to land or return

JR-MD1181 is an integrated UAV detection and countermeasure equipment that has been deeply developed. The equipment is designed to focus on the convenience of use and the ability to adapt to different scenarios, providing a variety of installation options such as portable use, fixed installation and roof installation, and can form 360° all-round coverage of X4 to meet the needs of different application scenarios.

Inquiry
High power in a single channel, operating distance of more than 1 km (depending on environment/model)

By transmitting a high-power co-band jamming signal to the UAV, the control signal is suppressed to cut off the connection between the UAV and the remote controller at a long distance

Advantages：Portable design, single-operator control, interference range over 1000 meters (depending on environment). Description：Quickly force drones to land or leave, achieving countermeasures and effectively managing rogue drones. Application Fields：Public safety, power systems, petrochemical, military sites, airports, prison surveillance.

$24980
It has the function of combining detection and attack, detection and confrontation, smaller size, lighter weight, full-band detection, and full-band positioning

The device has drone detection, recognition and jamming functions.

JR1115 UAV detection equipment can realize multi-target intrusion alarm, target identification and location, display target motion trajectory and display the position of the flight controller. The system realizes low altitude three-dimensional protection within the radius of the defense area greater than 5000 meters, and has been widely used in government agencies, prison guards, aviation airports, military restricted areas, major activities and other fields.

Inquiry
Strong Penetration Split Screen Display Structural Simulation Reconstruction Multi-target Real-time Positioning

It can penetrate non-metallic obstacles such as building walls, detect multiple personnel targets behind them, and quickly obtain information such as two-dimensional coordinates, number of targets, and indoor structure.

Portable Two Dimentional Positionaing Through Wall Radar 44 is a light and small two-dimensional positioning and penetrating reconnaissance equipment. It can penetrate non-metallic obstacles such as building walls to detect multiple personnel targets behind it, and quickly obtain information such as the 2D coordinates, number of targets, and indoor structure.

$1670
Shop by Categories