0
  • High power in a single channel, operating distance of more than 1 km (depending on environment/model)
  • High power in a single channel, operating distance of more than 1 km (depending on environment/model)

  • High power in a single channel, operating distance of more than 1 km (depending on environment/model)

  • Advantages：Portable design, single-operator control, interference range over 1000 meters (depending on environment). Description：Quickly force drones to land or leave, achieving countermeasures and effectively managing rogue drones. Application Fields：Public safety, power systems, petrochemical, military sites, airports, prison surveillance.
  • $ 24980
  • 0 in Stock NowJR-MD1123

  • GROUP

    JR1123

  • QUANTITY

  • Contact Online

The device will not destroy the drone, only to the drone to launch suppression control signals, interfere with the data link and positioning system, block the communication between the drone and the remote control and navigation signals, forcing the drone to hover, automatically land or return.

By launching high-power interference signals in the same frequency band (900MHz, 1.5G, 2.4G, 5.8G frequency band and 1.5G (GPS/-GLONASS/ satellite navigation)), the four-channel UAV strike gun represses the UAV control signal, interferes with the data link and positioning system, and cuts off the communication and navigation signals between the UAV and the remote control. Forcing the drone to hover, land or return.Through frequency interference blocking, the UAV flight control system, GNSS system and data transmission system are interfered with, and the communication between the UAV and the operator is blocked, forcing the UAV to land smoothly on the ground or return automatically.

The device emits high-power interference signals in the same frequency band to suppress the UAV control signal, and the interference distance can reach 1500m.

High gain directional antenna, energy concentration, more accurate target.

Use large capacity battery, sustainable work for more than 60 minutes, can be selected according to work needs.

The device is portable, highly maneuverable and is not constrained by any terrain environment, and can be flexibly deployed to all areas that need to be protected against drone intrusion.

It can interfere with most of the commonly used signal frequency bands of drones, covering more than 95% of mainstream UAV models on the market.

Grab the drone signal quickly, work as usual under fog and light rain weather conditions, and have strong environmental adaptability.

ModelDZ05-ProDevice WeightApprox. 4KG (including battery)Device Dimensions (excluding scope)Length 620mm * Width 160mm * Height 60mmAviation Case DimensionsLength 660mm * Width 400mm * Height 125mmAviation Case Weight (including device)Approx. 8.5KGAntenna TypeDirectionalAntenna Gain9dBAntenna Angle30 degreesPower Supply24v5AhOperating Time60 minutesOperating Temperature-20℃～+55℃Relative Humidity80%RHExpansion FunctionEquipped with standard rail, can install scope, night vision device, law enforcement recorder, etc.Jamming DistanceOpen area ≥1500 meters (depending on model/environment)Channel Frequencies And PowersJamming Frequency/PowerJamming FrequencyChannel Power5.8GHz20W900MHz/2.4GHz30W1.5GHz10W

You May Be Intersted
Quickly determine whether there is a target and obtain information about the distance and number of targets

It can penetrate non-metallic obstacles such as building walls and detect targets for people behind them

Hand-held Ranging Through Wall Radar CEM100 is a single-soldier hand-held one-dimensional ranging penetrating reconnaissance equipment, which can penetrate non-metallic obstacles such as building walls to detect the target of people behind it, quickly determine whether there is a target, and obtain the distance and number information of targets.

$3061
The product is mainly used for drone detection and identification, and can be freely matched with drone countermeasure equipment or decoy equipment to form a defence system

The system passively intercepts the image transmission signal and remote control signal to achieve passive detection, sideways, distance and identification of the UAV

The equipment is mainly used for UAV detection and identification, and can be freely matched with UAV countermeasure equipment or deception equipment to form a defense system.

$7780
Easy to Install Multi-sector Antenna Design High Power Broadband Power Amplifier Multi-band Interference

The omnidirectional jammer consists of a multi-channel digital signal source, a high-power broadband power amplifier, a broadband omnidirectional antenna, and a power module

The omnidirectional jammer interferes with the satellite navigation signal of the drone by transmitting electromagnetic waves or blocks the communication link between the drone and the remote control, so that the drone has the effect of forced landing or return. The omnidirectional jammer is composed of multi-channel digital signal source, high-power broadband power amplifier, broadband omnidirectional antenna, power supply module, etc. The jammer supports a variety of modulated signal outputs, and the broadband omnidirectional antenna realizes omnidirectional radiation of high-power interference signals.

Inquiry
It monitors the health and safety status of the received navigation satellite signals, identifies and isolates jamming signals and spoofing signals, and improves the security, stability and anti-attack ability of the timing system

Under the condition of full frequency suppression interference, the signal required for accuracy can still be synchronized

• Automatically switch between synchronization hold mode and denial sustain mode based on the status of input signals. • Real-time monitoring of satellite navigation signals at the installation location of the timing equipment • Automatically isolate non-secure GPS L1 and BDS B1 signals . • Monitor output signal status and log alerts for abnormal output signals. • Capable of remotely receiving command . • Resistant to meaconing and spoofing signals.

$12490
Provide all-round low-altitude protection anytime, anywhere; Support 4G, 5G wireless communication, free expansion networking Unmanned aerial vehicle (UAV)

It is suitable for small-scale defense such as luxury homes and vehicles,And can be quickly deployedUnmanned aerial vehicle (UAV)

JR-TSL1190 integrated inspection and combat equipment adopts passive detection with highly integrated design, which is suitable for small-scale defense such as luxury houses and vehicles, and can be quickly deployed. It supports 4G and 5G wireless communication, freely expands networking, and can realize wireless grid intelligent management and control for multiple stations.

Inquiry
Professional Support High Sensitivity Strong Penetrating Ability Multidimensional Positioning

By detecting faint human vital signs, such as heartbeat and breathing, it can capture the number of survivors trapped in obstacles, 2D and 3D coordinate information, such as rubble and collapsed buildings, to aid in accurate rescue.

Radar life detector 34 is a two-dimensional positioning life detection equipment. By detecting weak human vital signs such as heartbeat and breathing, it can obtain the number， 2D & 3D coordinate information of survivors trapped in obstacles such as ruins and collapsed buildings to assist accurate rescue.

$69600
When the UAV enters the defense area, the suspicious link signal is monitored and identified JR1178 Owl Defense System

Scientifically integrate four types of anti-UAV systems: radio spectrum detection, radar detection, navigation decoy, and electromagnetic interference JR-MD1178 Owl Defense System

Owl anti-UAV defense system uses radar + radio detection + omnidirectional electromagnetic interference + navigation decoy system architecture, through integrated structural design, to build a three-dimensional defense system. The radio spectrum monitoring system collects the surrounding radio signals in real time and scans them according to the configured frequency bands. When the UAV enters the defense area, the suspicious link signal is monitored and identified, and at the same time, it cooperates with the radar detection system to confirm, provides information such as the target working frequency band and distance, and the jamming system transmits electromagnetic suppression signals according to the plan to interfere with the UAV's image transmission and navigation signals; Or through the navigation deception system to transmit low-power regenerative navigation satellite signals (power not more than 10dBm), invade the UAV navigation system, set up a no-fly zone, deceive and confuse the UAV's navigation terminal, so that it cannot fly into the protected area, and ensure the low-altitude safety of the area.

Inquiry
It can make the UAV hover in situ, forced landing or return, effectively prevent the UAV from entering the defense area, and ensure the safety of low-altitude airspace

The system adopts the integrated design of detection and fighting, which combines UAV detection and countermeasure system, and is mainly used for detection, identification and interference countermeasures of UAVs in flight state.

JR-MD1138 for one system (full frequency) by drone detection (spectrum monitoring) system and radio interference system, using the integrated design, combining drone detection and counter system, mainly used for flying state of drones detection identification and interference counter, can make the drone situ hover, crash landing or return, effectively prevent the drones into the security, low-altitude airspace, with good performance, working distance, no personnel unattended, automatic uav detection counter.

$263570
Shop by Categories