0
  • This radar is mainly composed of a single independent radar array, used to monitor the detection, warning, and target indication of ships in coastal and inland areas, and can accurately provide target trajectory information.
  • This radar is mainly composed of a single independent radar array, used to monitor the detection, warning, and target indication of ships in coastal and inland areas, and can accurately provide target trajectory information.

  • This radar is mainly composed of a single independent radar array, used to monitor the detection, warning, and target indication of ships in coastal and inland areas, and can accurately provide target trajectory information.

  • This radar is mainly composed of a single independent radar array, used to monitor the detection, warning, and target indication of ships in coastal and inland areas, and can accurately provide target trajectory information.
  • $ 55510
  • 0 in Stock NowJR-MD1150

  • GROUP

    JR1150

  • QUANTITY

  • Contact Online

Advantages：Detect, warn, and indicate target areas, and accurately provide target trajectory information.

Description：This radar is mainly composed of a single independent radar array, used to monitor the detection, warning, and target indication of ships in coastal and inland areas, and can accurately provide target trajectory information.

Application Fields：used to monitor the detection, warning, and target indication of ships in coastal and inland areas

High Real-time SensitivityFast tracking speed, high accuracy, high data rate, and obvious trajectory tracking

All Weather Protection7*24 real-time protection, suitable for harsh environments such as night, rain, snow, haze, and dust

Portable And LightEasy to install, lightweight, and easy to operate

DBF TechnologyDBF technology can improve anti-interference ability by transmitting multi beam technolog

You May Be Intersted
It monitors the health and safety status of the received navigation satellite signals, identifies and isolates jamming signals and spoofing signals, and improves the security, stability and anti-attack ability of the timing system

Under the condition of full frequency suppression interference, the signal required for accuracy can still be synchronized

• Automatically switch between synchronization hold mode and denial sustain mode based on the status of input signals. • Real-time monitoring of satellite navigation signals at the installation location of the timing equipment • Automatically isolate non-secure GPS L1 and BDS B1 signals . • Monitor output signal status and log alerts for abnormal output signals. • Capable of remotely receiving command . • Resistant to meaconing and spoofing signals.

$12490
High power in a single channel, operating range of more than 1.5 km (depending on environment/model)

By transmitting a high-power co-band jamming signal to the UAV, the control signal is suppressed, and the connection between the UAV and the remote controller is cut off from a distance, forcing the UAV to land, hover or return home.

The three-channel drone strike gun has a portable design for rapid deployment and can be operated by one person.It can effectively control the low-altitude multi-rotor UAV on the market, isolate the contact between the UAV and the remote control, force the UAV to hover, land or return, and ensure the safety of the low-altitude airspace. The three-channel UAV strike gun suppresses the UAV control signal by transmitting high-power interference signals in the same frequency band (1.5GHz, 2.4GHz, 5.8GHz).

$13050
Multiple Complement Precise Detection Multi-factor Authentication Multiplexing

The system includes radar sensors, microseismic sensors, etc., which can be extended to sensors such as under-vehicle scanning, license plate recognition, identity recognition, vector and other external displays

The Multi-sensor Fusion Vehicle Personnel Hiding Detection System includes radar sensors, micro-seismic sensors, etc., which can be extended to sensors such as vehicle bottom scanning, license plate recognition, identity recognition, vector and other external displays to form a unified management system, and conduct comprehensive inspection and management of vehicles entering and exiting the AB door of the prison. The combination of radar sensor and microseismic sensor can give complete and effective life detection results for different vehicles and different environments through logical algorithms, and maximize the detection effect of vehicle personnel hiding.

$3450
Easy to Install Multi-sector Antenna Design High Power Broadband Power Amplifier Multi-band Interference

The omnidirectional jammer consists of a multi-channel digital signal source, a high-power broadband power amplifier, a broadband omnidirectional antenna, and a power module

The omnidirectional jammer interferes with the satellite navigation signal of the drone by transmitting electromagnetic waves or blocks the communication link between the drone and the remote control, so that the drone has the effect of forced landing or return. The omnidirectional jammer is composed of multi-channel digital signal source, high-power broadband power amplifier, broadband omnidirectional antenna, power supply module, etc. The jammer supports a variety of modulated signal outputs, and the broadband omnidirectional antenna realizes omnidirectional radiation of high-power interference signals.

Inquiry
JR1193 Knapsack frequency jammer (AB pack)

JR1193 Knapsack frequency jammer (AB pack)

backpack frequency interference system, suitable for use in special environments (small space, no power supply, vehicle interferometer can not enter the place). It integrates advanced digital radio technology, integrates electronic countermeasures, digital signal processing, power amplification, special antenna design and other advanced technologies in one, and can adapt to the needs of RCIED remote control device explosive field disposal, technical detection and monitoring, hostage rescue and other work.

$88810
It can realize automatic detection and identification, positioning and tracking, and interference disposal of intrusion drones

Multi-functional portable watch and play integrated system, full frequency detection + interference + flying hand positioning.

This system is based on the research and development of central control + message level protocol analysis technology, equipped with a UAV integrated control platform, which can carry out real-time monitoring and early warning of the UAV within the detection range, and accurately display the fuselage serial number, model, position, speed, altitude, track, remote control location and other information of the target UAV, so as to carry out countermeasures against the UAV and prevent the intrusion of the UAV.

Inquiry
It has the characteristics of good detection and countermeasure performance, long working distance, no need for personnel to be on duty, and automatic drone detection and countermeasures

It can make the UAV hover in situ, forced landing or return, effectively prevent the UAV from entering the defense area, and ensure the safety of low-altitude airspace

The system adopts the design of detecting and fighting as a whole, scientifically combining the drone detection and countermeasure system, mainly used for detecting and recognizing the drone in flight status and jamming and countermeasure, which can make the drone hovering in place, forced landing or returning to the flight, effectively preventing the drone from entering into the defense zone and guaranteeing the safety of low altitude airspace, with good detection and countermeasure performance, long working distance, no need to be guarded by the personnel, and automatically carrying out the detection and countermeasure of the drone.

$138800
Easy Installation, Wide Application High Power Broadband Power Amplifier Integrated Design Digital Interference Source Design

The interference frequency and interference bandwidth can be customized according to the mainstream UAV frequency band, and multiple interference channels can be output independently or combined

The full-frequency jamming device is a software-defined jammer, which can customize the jamming frequency and jamming bandwidth according to the mainstream drone frequency bands, and support independent or combined output of multiple jamming channels. The full-frequency jamming equipment interferes with the drone's satellite navigation signal or blocks the communication link between the drone and the remote control by transmitting electromagnetic waves, so that the drone has the effect of forced landing or return.

$3840
Shop by Categories