0
  • It monitors the health and safety status of the received navigation satellite signals, identifies and isolates jamming signals and spoofing signals, and improves the security, stability and anti-attack ability of the timing system
  • It monitors the health and safety status of the received navigation satellite signals, identifies and isolates jamming signals and spoofing signals, and improves the security, stability and anti-attack ability of the timing system
  • It monitors the health and safety status of the received navigation satellite signals, identifies and isolates jamming signals and spoofing signals, and improves the security, stability and anti-attack ability of the timing system

  • • Automatically switch between synchronization hold mode and denial sustain mode based on the status of input signals. • Real-time monitoring of satellite navigation signals at the installation location of the timing equipment • Automatically isolate non-secure GPS L1 and BDS B1 signals . • Monitor output signal status and log alerts for abnormal output signals. • Capable of remotely receiving command . • Resistant to meaconing and spoofing signals.
  • $ 12490
  • 0 in Stock NowJR-MD1131
  • Group

    1131

  • QUANTITY

  • Contact Online

Time Synchronization Protection Equipment

• Automatically switch between synchronization hold mode and denial sustain mode based on the status of input signals.

• Real-time monitoring of satellite navigation signals at the installation location of the timing equipment, with the capability to detect interference, trigger alarms when interference is present, and promptly alarms once the interference ceases.

• Automatically isolate non-secure GPS L1 and BDS B1 signals to ensure the normal operation of the timing equipment. Features static and dynamic user trajectory generation.

• Equipped with data reporting functionality, log storage, and the ability to record alarm statuses, disciplining statuses, operational statuses, and the health of input signals.

• Monitor output signal status and log alerts for abnormal output signals. Equipment operation inspection requires monitoring the health of input signals and logging accordingly.

• Capable of remotely receiving command and control instructions to configure output signals and report operational status in real-time.

• Resistant to meaconing and spoofing signals, maintaining output of signals that meet time synchronization precision requirements.

• Under full-band jamming interference conditions, sustain signal output to meet holdover accuracy requirements.

Improve the security, stability and anti-attack capability of the timing system. In the case of full frequency suppression interference, the signal output can be maintained to meet the requirements of punctuality and accuracy, and it is compatible with the time timing equipment of the existing power system. It can be installed between the time timing equipment and the navigation satellite signal receiving antenna without replacing the original time equipment, real-time monitoring of the health and safety status of the received navigation satellite signals, and identification and isolation of interference signals and deception signals. Improve the security, stability and anti-attack capability of the timing system.

Automatic isolation of unsafe GPS and BDS signals to ensure the normal operation of the timing equipment, the product uses a standard 1U chassis, easy to mount.

Automatic switching between synchronous hold mode and deny hold mode according to the state of the input signal.

Real-time monitoring of timing equipment installation location satellite navigation signal, determine whether there is interference, and alarm when there is interference; When the interference disappears, clear the alarm in time.

Automatically isolate unsafe GPS L1 and BDS B1 signals to ensure proper operation of the timing device. It has static and dynamic user trajectory generation function.

It has the function of data reporting and log storage, and can record the alarm status, tame status, running status, and input signal health status.

Monitor the output signal status, log alarm when the output signal is abnormal. Monitor the health status of input signals and record them in logs.

It can receive command and dispatch commands remotely, configure output signals, and report working status in real time.

It is not affected by the forwarded and generated spoofing signals, and continuously outputs the signals that meet the requirements of time synchronization accuracy.

Under the condition of full frequency suppression interference, the signal output is maintained to meet the requirements of punctuality and accuracy.

ModelUAD-P01SSOutput Frequency PointsGPS L1 C/A (1575.42MHz) BDS B1I (1561.098MHz) Other frequency points can be extendedReceiving Frequency PointsGPS-L1 (1575.42±1.023MHz)BDS-B1 (1561.098±2.046MHz)BDS-B3I (1268.52±10.23MHz)Other frequency points can be extendedOutput Power-125dBm-90dBmPower Supply and ConsumptionPower Supply: AC 220VNetwork Port: RJ451PPS Clock Input/Output: BNCTiming Signal Input/Output: BNCSatellite Signal Input/Output: TNCSecurity Signal Output: TNCOperating EnvironmentOperating Temperature: -20℃+70℃Storage Temperature: -45℃+85℃Dimensions480X300X445mm

You May Be Intersted
Good Scalability All-day, All-round Low False Alarm Rate  High Product Design Maturity

The device realizes the detection and early warning of the UAV (remote control) by detecting, identifying and locating the upper and lower remote control signals and data image transmission signals of the UAV

The RF Scanner is mainly composed of an array antenna, a radio frequency circuit, a multi-channel synchronous receiver, and a GNSS positioning module, etc., to realize the detection and discovery of drone in a specific frequency range. The equipment realizes the detection and early warning of the drone (remote control) by detecting, identifying and positioning the up and down remote control signals and data image transmission signals of thedrone aircraft. The device is a passive detection device, does not actively emit electromagnetic signals, green and safe.

$3400
When the UAV enters the defense area, the suspicious link signal is monitored and identified JR1178 Owl Defense System

Scientifically integrate four types of anti-UAV systems: radio spectrum detection, radar detection, navigation decoy, and electromagnetic interference JR-MD1178 Owl Defense System

Owl anti-UAV defense system uses radar + radio detection + omnidirectional electromagnetic interference + navigation decoy system architecture, through integrated structural design, to build a three-dimensional defense system. The radio spectrum monitoring system collects the surrounding radio signals in real time and scans them according to the configured frequency bands. When the UAV enters the defense area, the suspicious link signal is monitored and identified, and at the same time, it cooperates with the radar detection system to confirm, provides information such as the target working frequency band and distance, and the jamming system transmits electromagnetic suppression signals according to the plan to interfere with the UAV's image transmission and navigation signals; Or through the navigation deception system to transmit low-power regenerative navigation satellite signals (power not more than 10dBm), invade the UAV navigation system, set up a no-fly zone, deceive and confuse the UAV's navigation terminal, so that it cannot fly into the protected area, and ensure the low-altitude safety of the area.

Inquiry
The device is based on spectrum sensing and radio suppression technology, with UAV detection and countermeasure capabilities, capable of detecting, identifying and coordinating the fight against "rogue" UAVs

Integrated industrial design, simple and covert appearance, suitable for vehicle-mounted installation and use. Long detection and countermeasure range, up to 1-3 kilometers in urban environments.

Drone detection and countermeasure integrated vehicle-mounted device. The device is based on spectrum sensing and radio suppression technologies, possessing both drone detection and countermeasure capabilities, capable of detecting, identifying, and coordinated countermeasures against "rogue" drones. Integrated industrial design with a simple and covert appearance. Flexible deployment, long detection and countermeasure distances, reaching 1-3 kilometers in urban environments.

Inquiry
Quick-Change Capability in Mechanical Hand Equipped with standard mechanical claws (balanced type), knives, scissors, rakes, hooks, and drill bits for fast swapping and multifunctional combat tasks.

Robot Equipped with a 6-DOF Explosive Ordnance Disposal Arm Enables grabbing in any direction

The bomb disposal robot is a bomb disposal robot used for explosive-related work. It can also be used to detect terrain that is difficult for people to reach. It can be used with a variety of accessories, including bomb disposal rope hook locks, explosive destroyers, explosive detectors and remote detonation of explosives, etc. It is widely used in the military, armed police, public security and other bomb disposal needs.

$78000
High Positioning Accuracy Strong Penetration Indoor Structure Simulation Reconstruction Multi-target Real-time Positioning

It can penetrate non-metallic obstacles such as building walls, detect multiple personnel targets behind them, and quickly obtain information such as two-dimensional coordinates, the number of targets, and indoor structures.

Two Dimensional Through Wall Radar CE200 is a two-dimensional positioning penetrating reconnaissance equipment, which can penetrate non-metallic obstacles such as building walls to detect multiple personnel targets behind them, and quickly obtain information such as 2D coordinates, quantity of targets and indoor structure.

$2090
Radar&vision Deep Fusion All-round Detection Edge Intelligence Algorithms AI Intelligent Analysis Customization

Achieve all-round protection of protected areas. The product integrates radar and video at the signal level, combining active detection, high sensitivity and video visibility with radar technology

The Intelligent Radar Video Wide Area Surveillance System is mainly composed of intelligent millimeter wave detection radar, PTZ camera, and edge smart box. Through intelligent fusion algorithm, it can realize all-round protection of the protection area. The product integrates radar and video at signal level, perfectly combining the active detection, high sensitivity and video visibility of radar technology, which greatly improves the detection rate of the system in complex environments. Products can be widely used in important areas such as national (border) borders, prisons, camps, squares, ports, oil fields, oil depots, and construction sites.

$4460
Active Stereo Monitoring Radar&vision Deep Fusion Dual Spectral Detection  Intelligent Algorithm

Achieve proactive early warning. It has the advantages of high detection accuracy, wide-area 360° panoramic protection, active detection and alarm, high protection level, all-weather/all-weather operation, etc.

40 is a wide-area panoramic security protection product launched for the high-level security requirements of various industries such as judicial, military, petrochemical, electric power, public security, and important ports. With array radar and visual fusion technology, the system can realize intelligent detection of targets in the intrusion area and realize initiative warning. It has the advantages of high detection accuracy, wide-area 360° panoramic protection, active detection and alarm, high protection level and all-day/weather operation.

$43700
Multi-target Real-time Positioning Strong Compatibility Simulation and Reconstruction of Building Structures  Remote Wide Area Scan

It can remotely penetrate non-metallic obstacles such as building walls, detect multiple personnel targets behind them, and quickly obtain two-dimensional coordinates and quantities of targets, indoor structures, etc.

The long-distance wall penetration detection system 42 is a long-distance 2D positioning penetrating reconnaissance equipment, which can remotely penetrate non-metallic obstacles such as building walls to detect multiple personnel targets behind it, and quickly obtain the two-dimensional coordinates and quantity of targets, indoor structure, etc.

$1670
Shop by Categories