0
  • Interfering with the UAV satellite navigation signal or blocking the communication link between the UAV and the remote controller, so that the UAV has the effect of forced landing or return
  • Interfering with the UAV satellite navigation signal or blocking the communication link between the UAV and the remote controller, so that the UAV has the effect of forced landing or return
  • Interfering with the UAV satellite navigation signal or blocking the communication link between the UAV and the remote controller, so that the UAV has the effect of forced landing or return

  • The full-frequency omnidirectional jamming equipment interferes with the satellite navigation signal of the UAV by transmitting electromagnetic waves or blocking the communication link between the UAV and the remote controller, so that the UAV has the effect of forced landing or return. The full-band omnidirectional jamming equipment consists of multi-channel digital signal sources, high-power broadband power amplifiers, broadband omnidirectional antennas, power modules, etc. The equipment supports a variety of modulation signal outputs, and the broadband omnidirectional antenna realizes the omnidirectional radiation of high-power interference signals.
  • $ 3890
  • 0 in Stock NowJR-HN1171
  • Group

    1171

  • QUANTITY

  • Contact Online

Frequency band

300MHz-6000Mhz frequency band

Interference distance

≥3km (0.1W radiation source)

Transmit power

100W per band≤

Dry-pass ratio

Not less than 10:1

Interference angle

360° omnidirectional

Interference effective time

≤3s

Power supply mode

AC110~220V

Ingress protectionIP65

You May Be Intersted
Hacking into the "Black Fly" UAV navigation system, so as to achieve interception control of UAVs that require flight control using the navigation system, so that they cannot fly into protected areas

Deceptive interference is carried out on the satellite navigation coordinate information received by the UAV using satellite navigation and positioning, and the no-fly zone projection or area denial function is realized.

By radiating low-power regenerative navigation satellite signals (power no more than 10dBm), the "black fly" UAV navigation system is invaded, so as to achieve the interception and control of the UAV that needs to use the navigation system for flight control, so that it cannot fly into the protected area and ensure the low-altitude safety of the area. The equipment is designed with portable pull-rod box, which can be flexibly deployed in key areas of the field.

Inquiry
Radar&vision Deep Fusion All-round Detection Edge Intelligence Algorithms AI Intelligent Analysis Customization

Achieve all-round protection of protected areas. The product integrates radar and video at the signal level, combining active detection, high sensitivity and video visibility with radar technology

The Intelligent Radar Video Wide Area Surveillance System is mainly composed of intelligent millimeter wave detection radar, PTZ camera, and edge smart box. Through intelligent fusion algorithm, it can realize all-round protection of the protection area. The product integrates radar and video at signal level, perfectly combining the active detection, high sensitivity and video visibility of radar technology, which greatly improves the detection rate of the system in complex environments. Products can be widely used in important areas such as national (border) borders, prisons, camps, squares, ports, oil fields, oil depots, and construction sites.

$4460
small and slow targets, as well as pedestrians and vehicles. It can apply warning and target indication, and can provide real-time and accurate target trajectory information.

It can apply warning and target indication, and can provide real-time and accurate target trajectory information

This air surveillance radar is used for the detection of low altitude, small and slow targets, as well as pedestrians and vehicles. It can apply warning and target indication, and can provide real-time and accurate target trajectory information.

Inquiry
It can make the UAV hover in situ, forced landing or return, effectively prevent the UAV from entering the defense area, and ensure the safety of low-altitude airspace

The system adopts the integrated design of detection and fighting, which combines UAV detection and countermeasure system, and is mainly used for detection, identification and interference countermeasures of UAVs in flight state.

JR-MD1138 for one system (full frequency) by drone detection (spectrum monitoring) system and radio interference system, using the integrated design, combining drone detection and counter system, mainly used for flying state of drones detection identification and interference counter, can make the drone situ hover, crash landing or return, effectively prevent the drones into the security, low-altitude airspace, with good performance, working distance, no personnel unattended, automatic uav detection counter.

$263570
Quickly determine whether there is a target and obtain information about the distance and number of targets

It can penetrate non-metallic obstacles such as building walls and detect targets for people behind them

Hand-held Ranging Through Wall Radar CEM100 is a single-soldier hand-held one-dimensional ranging penetrating reconnaissance equipment, which can penetrate non-metallic obstacles such as building walls to detect the target of people behind it, quickly determine whether there is a target, and obtain the distance and number information of targets.

$3061
Easy to Install 24/7 Control All-in-one Design Multi-band Interference

By emitting electromagnetic waves, it interferes with the satellite navigation signal of the drone or blocks the communication link between the drone and the remote controller, resulting in the drone forcing the drone to land or return

The Photoelectric Interference Integrated Equipment is mainly composed of a jammer unit, an optoelectronic tracking unit and a servo turntable. By transmitting electromagnetic waves, it interferes with the satellite navigation signal of the drone or blocks the communication link between the drone and the remote controller, so as to cause the drone to make the drone forced to land or return. The interference unit supports independent or combined output of multiple interference channels. The photoelectric tracking unit can be configured with visible light and thermal imaging dual-light cameras, with all-day (day/night) tracking and forensics capabilities.

$3620
Multi-device Networking Application Rough Direction Finding Programmable Frequency Band Passive Detection

A portable drone control device is a hand-held integrated detector and jammer. It integrates detection, countermeasures, display and control, and power supply

Portable Drone Control Equipment is a Handheld Integrated Detector & Jammer. It integrates detection, countermeasures, display & control, and power supply all in one. It solved the problem found in the traditional portable jammers which only rely on naked eyes searching for drones with high missing rate. The device is in small size, light weight, and has good mobility, which is suitable for low-altitude protection tasks for important meetings, large events, and daily patrols in fixed places, etc. It can be interconnected with Novasky Anti-drone Defense System command terminal and the integrated command platform through a wireless network at multiple levels and combining with other AUDS equipment, to intelligentlize the information fusion, and unify the platform management. In this case, all resource can be utilized in maximum to construct a new type of supervision network for drones.

$55660
The optoelectronic tracking system completes the initial alignment of the target according to the target position information provided by the search system, and then searches for the target near the initial alignment area

It is composed of a tracking turntable and a photoelectric chamber, which is equipped with an uncooled infrared focal plane detector, a high-definition visible light camera and an image processing board

The infrared thermal imaging optoelectronic equipment is composed of a tracking turntable and a photoelectric chamber, which is equipped with an uncooled infrared focal plane detector, a high-definition visible light camera and an image processing board. The photoelectric tracking system completes the initial alignment of the target according to the target position information provided by the search system, and then searches for the target near the initial alignment area, and the suspicious target can be confirmed by automatic identification or manual designation in the search process, and then turns into the target automatic tracking working mode, so that the photoelectric sensor boresight axis and the radio frequency interference antenna installed on the tracking turntable can be aimed at the target in real time.

Inquiry
Shop by Categories