0
  • It monitors the health and safety status of the received navigation satellite signals, identifies and isolates jamming signals and spoofing signals, and improves the security, stability and anti-attack ability of the timing system
  • It monitors the health and safety status of the received navigation satellite signals, identifies and isolates jamming signals and spoofing signals, and improves the security, stability and anti-attack ability of the timing system

  • It monitors the health and safety status of the received navigation satellite signals, identifies and isolates jamming signals and spoofing signals, and improves the security, stability and anti-attack ability of the timing system

  • • Automatically switch between synchronization hold mode and denial sustain mode based on the status of input signals. • Real-time monitoring of satellite navigation signals at the installation location of the timing equipment • Automatically isolate non-secure GPS L1 and BDS B1 signals . • Monitor output signal status and log alerts for abnormal output signals. • Capable of remotely receiving command . • Resistant to meaconing and spoofing signals.
  • $ 12490
  • 0 in Stock NowJR-MD1131

  • Group

    1131

  • QUANTITY

  • Contact Online

Time Synchronization Protection Equipment

• Automatically switch between synchronization hold mode and denial sustain mode based on the status of input signals.

• Real-time monitoring of satellite navigation signals at the installation location of the timing equipment, with the capability to detect interference, trigger alarms when interference is present, and promptly alarms once the interference ceases.

• Automatically isolate non-secure GPS L1 and BDS B1 signals to ensure the normal operation of the timing equipment. Features static and dynamic user trajectory generation.

• Equipped with data reporting functionality, log storage, and the ability to record alarm statuses, disciplining statuses, operational statuses, and the health of input signals.

• Monitor output signal status and log alerts for abnormal output signals. Equipment operation inspection requires monitoring the health of input signals and logging accordingly.

• Capable of remotely receiving command and control instructions to configure output signals and report operational status in real-time.

• Resistant to meaconing and spoofing signals, maintaining output of signals that meet time synchronization precision requirements.

• Under full-band jamming interference conditions, sustain signal output to meet holdover accuracy requirements.

Improve the security, stability and anti-attack capability of the timing system. In the case of full frequency suppression interference, the signal output can be maintained to meet the requirements of punctuality and accuracy, and it is compatible with the time timing equipment of the existing power system. It can be installed between the time timing equipment and the navigation satellite signal receiving antenna without replacing the original time equipment, real-time monitoring of the health and safety status of the received navigation satellite signals, and identification and isolation of interference signals and deception signals. Improve the security, stability and anti-attack capability of the timing system.

Automatic isolation of unsafe GPS and BDS signals to ensure the normal operation of the timing equipment, the product uses a standard 1U chassis, easy to mount.

Automatic switching between synchronous hold mode and deny hold mode according to the state of the input signal.

Real-time monitoring of timing equipment installation location satellite navigation signal, determine whether there is interference, and alarm when there is interference; When the interference disappears, clear the alarm in time.

Automatically isolate unsafe GPS L1 and BDS B1 signals to ensure proper operation of the timing device. It has static and dynamic user trajectory generation function.

It has the function of data reporting and log storage, and can record the alarm status, tame status, running status, and input signal health status.

Monitor the output signal status, log alarm when the output signal is abnormal. Monitor the health status of input signals and record them in logs.

It can receive command and dispatch commands remotely, configure output signals, and report working status in real time.

It is not affected by the forwarded and generated spoofing signals, and continuously outputs the signals that meet the requirements of time synchronization accuracy.

Under the condition of full frequency suppression interference, the signal output is maintained to meet the requirements of punctuality and accuracy.

ModelUAD-P01SSOutput Frequency PointsGPS L1 C/A (1575.42MHz) BDS B1I (1561.098MHz) Other frequency points can be extendedReceiving Frequency PointsGPS-L1 (1575.42±1.023MHz)BDS-B1 (1561.098±2.046MHz)BDS-B3I (1268.52±10.23MHz)Other frequency points can be extendedOutput Power-125dBm-90dBmPower Supply and ConsumptionPower Supply: AC 220VNetwork Port: RJ451PPS Clock Input/Output: BNCTiming Signal Input/Output: BNCSatellite Signal Input/Output: TNCSecurity Signal Output: TNCOperating EnvironmentOperating Temperature: -20℃+70℃Storage Temperature: -45℃+85℃Dimensions480X300X445mm

You May Be Intersted
The system passively intercepts the image transmission signal and remote control signal to achieve passive detection, sideways, distance and identification of the UAV

Realize the passive detection of UAVs, detect the position, distance and altitude of UAVs, and identify models.

It is used for the detection and early warning of UAVs beyond the visual range, which solves the disadvantages of the current UAVS detection equipment, such as large size, high weight, high cost and high power consumption. The system passively intercepts the picture transmission signal and remote control signal between the UAVs and the remote control, and realizes the passive detection and early warning of UAVs. In the flat and unobserved open area of DJI Spirit 4, the farthest detection and positioning horizontal distance of the drone reaches a radius of 7.5KM.

$124900
The purpose of the construction of the OWL UAV defense system is to achieve efficient and precise strikes against UAVs and ensure the safety protection of specific areas or key facilities

24/7 wide area monitoring

According to the prison's demand for resistance to low altitude drone invasion/suspected ground moving target invasion and destruction/behavior management of prisoners inside the prison area, a prison three-dimensional defense system is built through an integrated structural design using radar+passive detection+omnidirectional interference equipment+drone deception equipment architecture.

Inquiry
It can accurately realize sound, light and vibration alarms for commonly used civilian UAVs including quadrotor, fixed-wing, DIY, traversing aircraft, etc. in complex electromagnetic environments, and the false alarm rate is low

In the complex electromagnetic environment, the sound, light and vibration alarms of common civilian UAVs are accurately realized, and the false alarm rate is low

The equipment is mainly used for drone detection and identification, and can be freely matched with drone countermeasure equipment or deception equipment to form a defense system.UAD-ZB01 drone detection equipment adopts self-developed low-power digital-analog hybrid receiver technology as well as advanced power management technology, and adopts external ultra-broadband antenna to accurately detect and identify commonly used civil drones, including quadcopters, fixed wing, DIY, traversing machine and so on, and realize sound, light and vibration alarms. It can realize sound, light and vibration alarms, and at the same time, it can realize extremely low false alarm rate in the complex electromagnetic environment.

$33300
The device is based on spectrum sensing and radio suppression technology, with UAV detection and countermeasure capabilities, capable of detecting, identifying and coordinating the fight against "rogue" UAVs

Integrated industrial design, simple and covert appearance, suitable for vehicle-mounted installation and use. Long detection and countermeasure range, up to 1-3 kilometers in urban environments.

Drone detection and countermeasure integrated vehicle-mounted device. The device is based on spectrum sensing and radio suppression technologies, possessing both drone detection and countermeasure capabilities, capable of detecting, identifying, and coordinated countermeasures against "rogue" drones. Integrated industrial design with a simple and covert appearance. Flexible deployment, long detection and countermeasure distances, reaching 1-3 kilometers in urban environments.

Inquiry
Multiple Complement Precise Detection Multi-factor Authentication Multiplexing

The system includes radar sensors, microseismic sensors, etc., which can be extended to sensors such as under-vehicle scanning, license plate recognition, identity recognition, vector and other external displays

The Multi-sensor Fusion Vehicle Personnel Hiding Detection System includes radar sensors, micro-seismic sensors, etc., which can be extended to sensors such as vehicle bottom scanning, license plate recognition, identity recognition, vector and other external displays to form a unified management system, and conduct comprehensive inspection and management of vehicles entering and exiting the AB door of the prison. The combination of radar sensor and microseismic sensor can give complete and effective life detection results for different vehicles and different environments through logical algorithms, and maximize the detection effect of vehicle personnel hiding.

$3450
Cut off the connection between the drone and the remote pilot at a distance, forcing the drone to land, hover, or return.

The device has a shield-like design for rapid deployment

The portable drone countermeasure device is a shield-type design, which is easier to carry, convenient for rapid deployment, can be operated by a single person, and the device has a built-in large-capacity battery, which can last for 45 minutes. The single channel has high power and has a range of more than 2.5 km. It can effectively control the low-altitude multi-rotor UAV on the market, once the equipment starts to strike, the remote control of the UAV can fail, the captured images and videos cannot be transmitted, the GNSS navigation system loses signal, and the connection between the UAV and the remote control is completely cut off, so as to effectively prevent the UAV from entering the defense area and ensure the safety of low-altitude airspace.

Inquiry
Accurately transmit the azimuth angle and field of view angle of the target to achieve accurate positioning of moving targets such as drones, vehicles, and ships.

Integrated intelligent detection, tracking, early warning and alarm functions laser fill light intelligent identification of optoelectronics

Laser light intelligent identification photoelectric has 7*24h monitoring capabilities, which can carry out fully automatic zooming, focusing and optical fog transmission in any weather conditions. It can recognize more than 80 types of targets, such as people, vehicles, ships, etc., and provide accurate target detection and recognition. It integrates intelligent detection, tracking, alerting, and alarming for zoom close-ups and captures of visible light images. Its design supports a wide range of monitoring from 0-360° horizontally and ±90° vertically, making it suitable for close-range target detection and tracking. The system can accurately transmit the azimuth angle and field of view angle of the target, and realize the accurate positioning of moving targets such as drones, vehicles, and ships.

Inquiry
Easy to Install 24/7 Control All-in-one Design Multi-band Interference

By emitting electromagnetic waves, it interferes with the satellite navigation signal of the drone or blocks the communication link between the drone and the remote controller, resulting in the drone forcing the drone to land or return

The Photoelectric Interference Integrated Equipment is mainly composed of a jammer unit, an optoelectronic tracking unit and a servo turntable. By transmitting electromagnetic waves, it interferes with the satellite navigation signal of the drone or blocks the communication link between the drone and the remote controller, so as to cause the drone to make the drone forced to land or return. The interference unit supports independent or combined output of multiple interference channels. The photoelectric tracking unit can be configured with visible light and thermal imaging dual-light cameras, with all-day (day/night) tracking and forensics capabilities.

$3620
Shop by Categories