0
  • Quickly determine whether there is a target and obtain information about the distance and number of targets
  • Quickly determine whether there is a target and obtain information about the distance and number of targets
  • Quickly determine whether there is a target and obtain information about the distance and number of targets
  • Quickly determine whether there is a target and obtain information about the distance and number of targets
  • Quickly determine whether there is a target and obtain information about the distance and number of targets

  • Hand-held Ranging Through Wall Radar CEM100 is a single-soldier hand-held one-dimensional ranging penetrating reconnaissance equipment, which can penetrate non-metallic obstacles such as building walls to detect the target of people behind it, quickly determine whether there is a target, and obtain the distance and number information of targets.
  • $ 3061
  • 0 in Stock NowJR-HN46
  • GROUP

    46

  • QUANTITY

  • Contact Online

Military Quality

Competent for harsh climatic environments and special occasions

Strong Penetration

Reliable penetration detection of common non-metallic building wall materials

Screen Off Detection

With the screen detection function, the detection is more concealed and the risk of exposure is reduced

Portability

Compact, lightweight and portable design, suitable for individual soldiers to carry around

Detection Angle

120°Detection ModeReal-time one-dimensional ranging, real-time detection of moving and static targets

Operating Temperature

-40~50℃

You May Be Intersted
When the UAV enters the defense area, the suspicious link signal is monitored and identified JR1178 Owl Defense System

Scientifically integrate four types of anti-UAV systems: radio spectrum detection, radar detection, navigation decoy, and electromagnetic interference JR-MD1178 Owl Defense System

Owl anti-UAV defense system uses radar + radio detection + omnidirectional electromagnetic interference + navigation decoy system architecture, through integrated structural design, to build a three-dimensional defense system. The radio spectrum monitoring system collects the surrounding radio signals in real time and scans them according to the configured frequency bands. When the UAV enters the defense area, the suspicious link signal is monitored and identified, and at the same time, it cooperates with the radar detection system to confirm, provides information such as the target working frequency band and distance, and the jamming system transmits electromagnetic suppression signals according to the plan to interfere with the UAV's image transmission and navigation signals; Or through the navigation deception system to transmit low-power regenerative navigation satellite signals (power not more than 10dBm), invade the UAV navigation system, set up a no-fly zone, deceive and confuse the UAV's navigation terminal, so that it cannot fly into the protected area, and ensure the low-altitude safety of the area.

Inquiry
Adaptable Low Cost High Refresh Rate Strong Recognition Ability

The RF scan 3D security radar adopts 3D scanning technology, aiming at the three-coordinate three-dimensional space surveillance of low-altitude, ground targets, all-round and high-elevation coverage

The RF scan 3D security radar adopts 3D scanning technology, aiming at the three-coordinate three-dimensional space surveillance of low-altitude, ground targets, all-round and high-elevation coverage, and is mainly responsible for the real-time reconnaissance of aircraft, ground personnel, vehicles and other targets in the surrounding area, finds and tracks the target, and output or report the target information to the specified user. The radar supports three erection modes: fixed, vehicle-mounted and portable, and is flexibly suitable for various low-altitude and ground security application scenarios.

Inquiry
By emitting electromagnetic waves in specific frequency bands to interfere with UAVs, disrupt flight control and signal transmission systems

Portable design, single-operator control, interference range over 1000 meters (depending on environment)

Handheld anti-drone device. Interferes with drones by emitting electromagnetic waves in specific frequency bands, disrupting flight control and signal transmission systems. Quickly forces drones to land or leave, achieving effective control over rogue drones.

$19425
Full-band software-defined design Efficient operation Highly integrated Green and safe UAV full-band jamming equipment JR-TSL1189

The products are widely used in important places such as prisons, airports, military bases, power plants and various substations UAV full-band jamming equipment

The JR-TSL1189 series of UAV full-band jamming equipment adopts open smart jamming technology, which can suppress the receiving channels of UAV navigation signals, remote control signals and image transmission signals, so that the UAV cannot be located and lose control, so as to achieve the purpose of denying the invasion of UAVs.

Inquiry
High Real-time And High Sensitivity Strong Environmental Adaptability  DBF Technology Phased Array Technology

can accurately provide target trajectory information.

This air surveillance radar is mainly used for the detection, warning, and target indication of drones in key areas such as borders, airports, and military bases, and can accurately provide target trajectory information.

$221960
It can effectively control the low-altitude multi-rotor UAV on the market, and once the equipment starts the strike, the remote control of the UAV can fail, and the captured images and videos cannot be transmitted back

The device is composed of a detection system, a jamming system, and an operation terminal tablet, and is a highly integrated and portable anti-drone system

The gun-type UAV removal equipment is mainly used for compulsory control of the UAV or the flying model in the flight state, launching suppression control signals to the UAV, interfering with the data link and positioning system, blocking the communication and navigation signals between the UAV and the remote control, forcing the UAV to hover in place, automatically land or return.

$12500
The equipment is small in size, light in weight and easy to carry, so it can be used as a single soldier or combined with the network to perform coordinated security tasks

The jammer integrates the functions of detection,tracking,forensics,display and control,countermeasures,and networking Unmanned aerial vehicle

JR-TSL1182 UAV inspection and combat integrated handheld control equipment is a set of inspection and combat integrated handheld jammer, which integrates detection, tracking, forensics, display and control, countermeasures, and networking functions

$55490
Hacking into the "Black Fly" UAV navigation system, so as to achieve interception control of UAVs that require flight control using the navigation system, so that they cannot fly into protected areas

Deceptive interference is carried out on the satellite navigation coordinate information received by the UAV using satellite navigation and positioning, and the no-fly zone projection or area denial function is realized.

By radiating low-power regenerative navigation satellite signals (power no more than 10dBm), the "black fly" UAV navigation system is invaded, so as to achieve the interception and control of the UAV that needs to use the navigation system for flight control, so that it cannot fly into the protected area and ensure the low-altitude safety of the area. The equipment is designed with portable pull-rod box, which can be flexibly deployed in key areas of the field.

Inquiry
Shop by Categories