0
  • The optoelectronic tracking system completes the initial alignment of the target according to the target position information provided by the search system, and then searches for the target near the initial alignment area
  • The optoelectronic tracking system completes the initial alignment of the target according to the target position information provided by the search system, and then searches for the target near the initial alignment area

  • The optoelectronic tracking system completes the initial alignment of the target according to the target position information provided by the search system, and then searches for the target near the initial alignment area

  • The infrared thermal imaging optoelectronic equipment is composed of a tracking turntable and a photoelectric chamber, which is equipped with an uncooled infrared focal plane detector, a high-definition visible light camera and an image processing board. The photoelectric tracking system completes the initial alignment of the target according to the target position information provided by the search system, and then searches for the target near the initial alignment area, and the suspicious target can be confirmed by automatic identification or manual designation in the search process, and then turns into the target automatic tracking working mode, so that the photoelectric sensor boresight axis and the radio frequency interference antenna installed on the tracking turntable can be aimed at the target in real time.
  • $ Inquiry
  • 0 in Stock NowJR-MD1175

  • Group

    JR1175

  • QUANTITY

  • Contact Online

Product introduction: The tracer turntable is composed of a photoelectric chamber, which is equipped with an uncooled infrared focal plane detector, a high-definition visible light camera and an image processing board. According to the target location information provided by the search system, the photoelectric tracking system can confirm the suspicious target by automatic identification or manual designation during the search process, and then switch to the target automatic tracking working mode.

Infrared thermal imaging: 30m ≥ object distance

Visible light camera: 120m between ≥ and objects

Applicable scenarios: public security, power system, anti-terrorism, public security, border and coastal defense, military facility perimeter, airports and ports and other key security places in large scenarios.

You May Be Intersted
Interfering with the UAV satellite navigation signal or blocking the communication link between the UAV and the remote controller, so that the UAV has the effect of forced landing or return

Active thermal design, wideband power amplifier design, digital interference source design, software customization

The full-frequency omnidirectional jamming equipment interferes with the satellite navigation signal of the UAV by transmitting electromagnetic waves or blocking the communication link between the UAV and the remote controller, so that the UAV has the effect of forced landing or return. The full-band omnidirectional jamming equipment consists of multi-channel digital signal sources, high-power broadband power amplifiers, broadband omnidirectional antennas, power modules, etc. The equipment supports a variety of modulation signal outputs, and the broadband omnidirectional antenna realizes the omnidirectional radiation of high-power interference signals.

$3890
Strong Penetration Indoor Structure Simulation Reconstruction Multi-target Real-time Positioning Intelligent Recognition

which can penetrate non-metallic obstacles such as building walls to detect multiple personnel targets behind it, and quickly obtain information such as 3D imaging, 2D coordinates, attitude, quantity of targets and indoor structure.

Three Dimensional Imaging Through Wall Radar 43 is a 3D imaging penetrating reconnaissance equipment, which can penetrate non-metallic obstacles such as building walls to detect multiple personnel targets behind it, and quickly obtain information such as 3D imaging, 2D coordinates, attitude, quantity of targets and indoor structure.

$55700
When the UAV enters the defense area, the suspicious link signal is monitored and identified JR1178 Owl Defense System

Scientifically integrate four types of anti-UAV systems: radio spectrum detection, radar detection, navigation decoy, and electromagnetic interference JR-MD1178 Owl Defense System

Owl anti-UAV defense system uses radar + radio detection + omnidirectional electromagnetic interference + navigation decoy system architecture, through integrated structural design, to build a three-dimensional defense system. The radio spectrum monitoring system collects the surrounding radio signals in real time and scans them according to the configured frequency bands. When the UAV enters the defense area, the suspicious link signal is monitored and identified, and at the same time, it cooperates with the radar detection system to confirm, provides information such as the target working frequency band and distance, and the jamming system transmits electromagnetic suppression signals according to the plan to interfere with the UAV's image transmission and navigation signals; Or through the navigation deception system to transmit low-power regenerative navigation satellite signals (power not more than 10dBm), invade the UAV navigation system, set up a no-fly zone, deceive and confuse the UAV's navigation terminal, so that it cannot fly into the protected area, and ensure the low-altitude safety of the area.

Inquiry
The optoelectronic tracking system completes the initial alignment of the target according to the target position information provided by the search system, and then searches for the target near the initial alignment area

It is composed of a tracking turntable and a photoelectric chamber, which is equipped with an uncooled infrared focal plane detector, a high-definition visible light camera and an image processing board

The infrared thermal imaging optoelectronic equipment is composed of a tracking turntable and a photoelectric chamber, which is equipped with an uncooled infrared focal plane detector, a high-definition visible light camera and an image processing board. The photoelectric tracking system completes the initial alignment of the target according to the target position information provided by the search system, and then searches for the target near the initial alignment area, and the suspicious target can be confirmed by automatic identification or manual designation in the search process, and then turns into the target automatic tracking working mode, so that the photoelectric sensor boresight axis and the radio frequency interference antenna installed on the tracking turntable can be aimed at the target in real time.

Inquiry
High power in a single channel, operating distance of more than 1 km (depending on environment/model)

By transmitting a high-power co-band jamming signal to the UAV, the control signal is suppressed to cut off the connection between the UAV and the remote controller at a long distance

Advantages：Portable design, single-operator control, interference range over 1000 meters (depending on environment). Description：Quickly force drones to land or leave, achieving countermeasures and effectively managing rogue drones. Application Fields：Public safety, power systems, petrochemical, military sites, airports, prison surveillance.

$24980
It has the ability to suppress the receiving channels of UAV navigation signals, remote control signals, and image transmission signals

The three channels are independently powered, and each channel can be flexibly controlled to set interference separately.

JR1126 jammer is a device that interferes with UAV signals. It has the ability to suppress the navigation signal, remote control signal and the receiving channel of the image transmission signal of the UAV, so that the UAV can not locate and lose control, and thus achieve the purpose of preventing the intrusion of the UAV. Suitable for assembly with other equipment systems, can also be used separately for interference installation.

Inquiry
The UAV detection and countermeasure system is scientifically combined, which is mainly used for the detection, identification and interference countermeasures of the UAV in the flight state

The system features drone detection and early warning, model identification, and countermeasures for expulsion.

The system adopts the design of detecting and fighting as a whole, scientifically combining the drone detection and countermeasure system, mainly used for detecting and recognizing the drone in flight status and jamming and countermeasure, which can make the drone hovering in place, forced landing or returning to the flight, effectively preventing the drone from entering into the defense zone and guaranteeing the safety of low altitude airspace, with good detection and countermeasure performance, long working distance, no need to be guarded by the personnel, and automatically carrying out the detection and countermeasure of the drone.

$180400
Disabling the drone's satellite navigation, wireless remote control, and wireless video transmission links forces the drone to hover in place, land, or return to the original route. Compared to omnidirectional jamming, the strike is accurate

Compared to omnidirectional interference, the targeting is more precise, the impact on the surrounding environment is minimal, and the reliability is higher.

The device is mainly used for signal interference of UAV, and can be combined with the detection equipment of UAV to form an intelligent linkage defense system.

$97110
Shop by Categories