Adjustable power, all-in-one design, full-range radio interference Radio jamming and navigation decoy all-in-one device

The equipment is based on AOA+TDOA composite positioning technology, and has the functions of detection and early warning, model recognition, positioning tracking and trajectory playback of UAVs inside and outside the multi-station range

The full-frequency detection equipment is mainly composed of an array antenna, a radio frequency circuit, a multi-channel synchronous receiver, a GNSS positioning module, etc. The equipment is based on AOA+TDOA composite positioning technology, and has functions such as detection and early warning, model identification, positioning tracking and trajectory playback of drone within and outside the range of multiple stations. Any number of detection devices can be freely expanded according to the scope of the monitoring area.

$3340

The device is portable, highly maneuverable, and not constrained by any terrain, and can be flexibly deployed in all areas that need to be protected against drone intrusion.

The strike gun will not destroy or damage the UAV, its main working principle is to interfere with the UAV's flight control system, signal transmission system, so that the UAV can achieve vertical landing or automatic return, six-channel detection belt direction finding, six-channel interference, can detect and interfere with most of the common signal frequency bands of the UAV, covering more than 95% of the UAV models on the market.

Inquiry

Multi-functional portable watch and play integrated system, full frequency detection + interference + flying hand positioning.

This system is based on the research and development of central control + message level protocol analysis technology, equipped with a UAV integrated control platform, which can carry out real-time monitoring and early warning of the UAV within the detection range, and accurately display the fuselage serial number, model, position, speed, altitude, track, remote control location and other information of the target UAV, so as to carry out countermeasures against the UAV and prevent the intrusion of the UAV.

Inquiry

Full spectrum jamming, covering 20MHz-6GHz, with customizable frequency bands

The omnidirectional jamming device uses an omnidirectional antenna array to block and interfere with the reception and processing of drone signals, such as video transmission, remote control, and navigation, within a 360° range. This achieves countermeasures like forced return, forced landing, and repelling, allowing for rapid and effective handling of suspicious drones.

Inquiry

It is mainly used to detect and identify UAVs It can be easily and quickly installed on the counter gun equipment, so as to form an integrated defense system for detection and strike.

The Portable Drone detection device is an efficient, portable and scalable device that is primarily used to detect and identify drones. The design of the bottom card slot enables the detection equipment to be easily and quickly installed on the anti-gun equipment, thus forming an integrated detection and attack defense system, and can also be combined with other defense systems to form a more powerful integrated defense system.

Inquiry

Scientifically integrate four types of anti-UAV systems: radio spectrum detection, radar detection, navigation decoy, and electromagnetic interference JR-MD1178 Owl Defense System

Owl anti-UAV defense system uses radar + radio detection + omnidirectional electromagnetic interference + navigation decoy system architecture, through integrated structural design, to build a three-dimensional defense system. The radio spectrum monitoring system collects the surrounding radio signals in real time and scans them according to the configured frequency bands. When the UAV enters the defense area, the suspicious link signal is monitored and identified, and at the same time, it cooperates with the radar detection system to confirm, provides information such as the target working frequency band and distance, and the jamming system transmits electromagnetic suppression signals according to the plan to interfere with the UAV's image transmission and navigation signals; Or through the navigation deception system to transmit low-power regenerative navigation satellite signals (power not more than 10dBm), invade the UAV navigation system, set up a no-fly zone, deceive and confuse the UAV's navigation terminal, so that it cannot fly into the protected area, and ensure the low-altitude safety of the area.

Inquiry

The interference frequency and interference bandwidth can be customized according to the mainstream UAV frequency band, and multiple interference channels can be output independently or combined

The full-frequency jamming device is a software-defined jammer, which can customize the jamming frequency and jamming bandwidth according to the mainstream drone frequency bands, and support independent or combined output of multiple jamming channels. The full-frequency jamming equipment interferes with the drone's satellite navigation signal or blocks the communication link between the drone and the remote control by transmitting electromagnetic waves, so that the drone has the effect of forced landing or return.

$3840

JR1193 Knapsack frequency jammer (AB pack)

backpack frequency interference system, suitable for use in special environments (small space, no power supply, vehicle interferometer can not enter the place). It integrates advanced digital radio technology, integrates electronic countermeasures, digital signal processing, power amplification, special antenna design and other advanced technologies in one, and can adapt to the needs of RCIED remote control device explosive field disposal, technical detection and monitoring, hostage rescue and other work.

$88810