0
  • Lightweight and Portable Unattended Multi-dimensional Accurate Detection Advanced Technology System
  • Lightweight and Portable Unattended Multi-dimensional Accurate Detection Advanced Technology System
  • Lightweight and Portable Unattended Multi-dimensional Accurate Detection Advanced Technology System
  • Lightweight and Portable Unattended Multi-dimensional Accurate Detection Advanced Technology System
  • Lightweight and Portable Unattended Multi-dimensional Accurate Detection Advanced Technology System
  • Lightweight and Portable Unattended Multi-dimensional Accurate Detection Advanced Technology System
  • Lightweight and Portable Unattended Multi-dimensional Accurate Detection Advanced Technology System

  • Low-altitude surveillance radar is 3D space surveillance radar that aims at low-altitude small target, all-around, high elevation coverage area. It is mainly designed for real-time detection and tracking of air vehicle, ground human and vehicle target. Then target information will be transmitted and reported to management and control center. It can be installed by long-term fixed, vehicle mounted and temporary deployment, flexibly apply to different application scenarios.
  • $ Inquiry
  • 0 in Stock NowJR-HN33
  • GROUP

    SKU

  • QUANTITY

  • Contact Online

Frequency Band

Ku-band

Scanning Method

Elevation electrical scanning + Azimuth mechanical scanning

Detection Radius

>5km(micro drone RCS=0.01㎡)

Distance accuracy

≤10m

Azimuth accuracy

≤0.6°

Pitch accuracy

≤0.6°

You May Be Intersted
Radar&vision Deep Fusion All-round Detection Edge Intelligence Algorithms AI Intelligent Analysis Customization

Achieve all-round protection of protected areas. The product integrates radar and video at the signal level, combining active detection, high sensitivity and video visibility with radar technology

The Intelligent Radar Video Wide Area Surveillance System is mainly composed of intelligent millimeter wave detection radar, PTZ camera, and edge smart box. Through intelligent fusion algorithm, it can realize all-round protection of the protection area. The product integrates radar and video at signal level, perfectly combining the active detection, high sensitivity and video visibility of radar technology, which greatly improves the detection rate of the system in complex environments. Products can be widely used in important areas such as national (border) borders, prisons, camps, squares, ports, oil fields, oil depots, and construction sites.

$4460
Adaptable Low Cost High Refresh Rate Strong Recognition Ability

The RF scan 3D security radar adopts 3D scanning technology, aiming at the three-coordinate three-dimensional space surveillance of low-altitude, ground targets, all-round and high-elevation coverage

The RF scan 3D security radar adopts 3D scanning technology, aiming at the three-coordinate three-dimensional space surveillance of low-altitude, ground targets, all-round and high-elevation coverage, and is mainly responsible for the real-time reconnaissance of aircraft, ground personnel, vehicles and other targets in the surrounding area, finds and tracks the target, and output or report the target information to the specified user. The radar supports three erection modes: fixed, vehicle-mounted and portable, and is flexibly suitable for various low-altitude and ground security application scenarios.

Inquiry
Ease of use and variety of scenarios Detection and combat all-in-one equipment

By interfering with the UAV's control system and communication link, the UAV is forced to land or return

JR-MD1181 is an integrated UAV detection and countermeasure equipment that has been deeply developed. The equipment is designed to focus on the convenience of use and the ability to adapt to different scenarios, providing a variety of installation options such as portable use, fixed installation and roof installation, and can form 360° all-round coverage of X4 to meet the needs of different application scenarios.

Inquiry
Quickly determine whether there is a target and obtain information about the distance and number of targets

It can penetrate non-metallic obstacles such as building walls and detect targets for people behind them

Hand-held Ranging Through Wall Radar CEM100 is a single-soldier hand-held one-dimensional ranging penetrating reconnaissance equipment, which can penetrate non-metallic obstacles such as building walls to detect the target of people behind it, quickly determine whether there is a target, and obtain the distance and number information of targets.

$3061
JR1193 Knapsack frequency jammer (AB pack)

JR1193 Knapsack frequency jammer (AB pack)

backpack frequency interference system, suitable for use in special environments (small space, no power supply, vehicle interferometer can not enter the place). It integrates advanced digital radio technology, integrates electronic countermeasures, digital signal processing, power amplification, special antenna design and other advanced technologies in one, and can adapt to the needs of RCIED remote control device explosive field disposal, technical detection and monitoring, hostage rescue and other work.

$88810
It covers the key frequency bands of multi-band UAV communication from 650MHz to 6200MHz, and has a strong interference force of 50W per segment

Enforce control for drones in flight, cut off the connection between drones and remote controllers from a distance, and force drones to land, hover, or return.

The knapsack UAV countermeasure equipment suppresses the control signal by transmitting a high-power co-band jamming signal to the UAV, interferes with the UAV's data link and positioning system, and cuts off the communication and navigation signals between the UAV and the remote control, thereby forcing the UAV to hover in situ, automatically land or return, effectively prevent the UAV from entering the defense area, and ensure the safety of low-altitude airspace.

$33300
It can make the UAV hover in situ, forced landing or return, effectively prevent the UAV from entering the defense area, and ensure the safety of low-altitude airspace

The system adopts the integrated design of detection and fighting, which combines UAV detection and countermeasure system, and is mainly used for detection, identification and interference countermeasures of UAVs in flight state.

JR-MD1138 for one system (full frequency) by drone detection (spectrum monitoring) system and radio interference system, using the integrated design, combining drone detection and counter system, mainly used for flying state of drones detection identification and interference counter, can make the drone situ hover, crash landing or return, effectively prevent the drones into the security, low-altitude airspace, with good performance, working distance, no personnel unattended, automatic uav detection counter.

$263570
The power advantage is used to make the UAV navigation system receive an analog navigation signal with false position information

Drone decoy jammers emit simulated satellite navigation signals through simulation Drone decoy active defense system

JR-TSL1186 series UAV decoy jammer simulates the satellite navigation signal by simulating the transmission, competes with the satellite signal in orbit, uses the power advantage, makes the UAV navigation system receive the simulated navigation signal with false position information, makes the UAV "lost" in the control area, can not fly according to the predetermined track, can make the UAV produce the effect of driving away, forced landing, or unable to take off.

Inquiry
Shop by Categories