Easy to Install Green Safety Partition Control Integrated Design

Under the condition of full frequency suppression interference, the signal required for accuracy can still be synchronized

• Automatically switch between synchronization hold mode and denial sustain mode based on the status of input signals. • Real-time monitoring of satellite navigation signals at the installation location of the timing equipment • Automatically isolate non-secure GPS L1 and BDS B1 signals . • Monitor output signal status and log alerts for abnormal output signals. • Capable of remotely receiving command . • Resistant to meaconing and spoofing signals.

$12490

Detection radius 2km, low power consumption, small size, light weight, easy to install.

omnidirectional detection is mainly used for the detection of over-the-horizon UAV, which solves the shortcomings of the current UAV detection equipment such as large volume, large weight, high cost and large power consumption. The equipment has the advantages of high cost performance, long-term stability and reliability, no electric radiation, low power consumption, small size, light weight, easy installation and high cost performance.

$13880

The detection end passively intercepts the signal between the drone and the remote control to realize the detection of the drone

The detection terminal uses the radio spectrum monitoring system to passively intercept the image transmission signal and the remote control signal between the UAV and the remote control to realize the passive detection of the UAV. The strike end is mainly for the compulsory control of the UAV or the flying model in the flying state, and the contact between the UAV and the remote control person is cut off at a distance. The interceptor can force the UAV to land or return to the air to ensure the safety of the low-altitude airspace in the region.Cut off all signal communication between the drone and the controller, and the ground controller of the drone can not receive aerial videos and pictures. The drone is unable to locate, forcing the drone to land, hover, or turn back.

$52050

The three channels are independently powered, and each channel can be flexibly controlled to set interference separately.

JR1126 jammer is a device that interferes with UAV signals. It has the ability to suppress the navigation signal, remote control signal and the receiving channel of the image transmission signal of the UAV, so that the UAV can not locate and lose control, and thus achieve the purpose of preventing the intrusion of the UAV. Suitable for assembly with other equipment systems, can also be used separately for interference installation.

Inquiry

Full spectrum jamming, covering 20MHz-6GHz, with customizable frequency bands

The omnidirectional jamming device uses an omnidirectional antenna array to block and interfere with the reception and processing of drone signals, such as video transmission, remote control, and navigation, within a 360° range. This achieves countermeasures like forced return, forced landing, and repelling, allowing for rapid and effective handling of suspicious drones.

Inquiry

The jammer integrates the functions of detection,tracking,forensics,display and control,countermeasures,and networking Unmanned aerial vehicle

JR-TSL1182 UAV inspection and combat integrated handheld control equipment is a set of inspection and combat integrated handheld jammer, which integrates detection, tracking, forensics, display and control, countermeasures, and networking functions

$55490

The equipment is based on AOA+TDOA composite positioning technology, and has the functions of detection and early warning, model recognition, positioning tracking and trajectory playback of UAVs inside and outside the multi-station range

The full-frequency detection equipment is mainly composed of an array antenna, a radio frequency circuit, a multi-channel synchronous receiver, a GNSS positioning module, etc. The equipment is based on AOA+TDOA composite positioning technology, and has functions such as detection and early warning, model identification, positioning tracking and trajectory playback of drone within and outside the range of multiple stations. Any number of detection devices can be freely expanded according to the scope of the monitoring area.

$3340

The detection radius is 5-7km ultra-long-range detection distance, covering 95% of UAV models

The UAD-ZQY03 radio detection device enables passive detection, lateral, range and identification of UAVs. The UAV can detect more than 95% of the mainstream UAVs on the market with a detection radius of 5-7km. The device also has a black and white list function, which can ensure that our drones work normally and are not affected.

$124850