0
  • Multiple Complement Precise Detection Multi-factor Authentication Multiplexing
  • Multiple Complement Precise Detection Multi-factor Authentication Multiplexing

  • Multiple Complement Precise Detection Multi-factor Authentication Multiplexing

  • The Multi-sensor Fusion Vehicle Personnel Hiding Detection System includes radar sensors, micro-seismic sensors, etc., which can be extended to sensors such as vehicle bottom scanning, license plate recognition, identity recognition, vector and other external displays to form a unified management system, and conduct comprehensive inspection and management of vehicles entering and exiting the AB door of the prison. The combination of radar sensor and microseismic sensor can give complete and effective life detection results for different vehicles and different environments through logical algorithms, and maximize the detection effect of vehicle personnel hiding.
  • $ 3450
  • 0 in Stock NowJR-HN37

  • GROUP

    37

  • QUANTITY

  • Contact Online

Multiple Complement

The multi-adaptability of microseismic and the precise positioning and high accuracy of radar are complementary, can provide the best solution

Precise Detection

The combination of multiple types of sensors avoids the limitation of a single sensor and is the detection system with the lowest missed detection rate at present

Multi-factor Authentication

The data collected by the sensor is captured by the core algorithm to capture vital signs, and the results are reliable after repeated verification.

Multiplexing

It can expand the sensors such as vehicle bottom scanning, license plate recognition, vector, etc., and automatically scan the inside and outside of the vehicle at the same time

Easy to Operate

Simple and easy-to-use operation interface, friendly prompt information, simple operation of the application system

Flexible Expansion

Open data interface enables the system to connect data with other various management systems

Detection Technology

Microseismic accurate acquisition of effective continuous vibration frequency within 0.5Hz-30HzRadar adopts MIMO system

Detection Range

Microseismic omnidirectional detection, a single microseismic sensor control area ≥ 20m² spaceRadar can detect stationary human targets within 20m

Penetrated Materials

Microseismic can penetrate metal products, electronic products and other non-shock-absorbing itemsRadar may penetrate non-metallic solids such as clothing, cardboard boxes, and wood.

Detection TargetCan be selected for various models and various environments to achieve different detection modesInstallation Method

The Microseismic adopts permanent magnet to absorb up and downThe radar adopts top hoisting and intelligent mobile chassis installation

You May Be Intersted
In order to realize the interception control of UAVs that need to use the navigation system for flight control, so that they cannot fly into the protected area, and ensure the low-altitude safety of the area

Prevent drones from flying in sensitive areas and set up "no-fly zones" for drones

Based on the deception of the drone's internal positioning device and the database of restricted and no-fly zones, the drone can react according to its own built-in program strategy. The UAV navigation decoy system transmits simulated satellite navigation signals to navigate and decoy the UAV that intrudes into sensitive areas, so as to realize the defense and control of the UAV. The system mainly injects navigation deception signals into the UAV to realize the control and takeover of the UAV, so that the UAV can be quickly located to a safe area, so that the UAV can fly quickly, get out of the control of the operator, and decoy or set up a no-fly zone to prevent the UAV from flying in sensitive areas and set up a "no-fly zone" for the UAV.

Inquiry
Strong Penetration Indoor Structure Simulation Reconstruction Multi-target Real-time Positioning Intelligent Recognition

which can penetrate non-metallic obstacles such as building walls to detect multiple personnel targets behind it, and quickly obtain information such as 3D imaging, 2D coordinates, attitude, quantity of targets and indoor structure.

Three Dimensional Imaging Through Wall Radar 43 is a 3D imaging penetrating reconnaissance equipment, which can penetrate non-metallic obstacles such as building walls to detect multiple personnel targets behind it, and quickly obtain information such as 3D imaging, 2D coordinates, attitude, quantity of targets and indoor structure.

$55700
It can make the UAV hover in situ, forced landing or return, effectively prevent the UAV from entering the defense area, and ensure the safety of low-altitude airspace

The system adopts the integrated design of detection and fighting, which combines UAV detection and countermeasure system, and is mainly used for detection, identification and interference countermeasures of UAVs in flight state.

JR-MD1138 for one system (full frequency) by drone detection (spectrum monitoring) system and radio interference system, using the integrated design, combining drone detection and counter system, mainly used for flying state of drones detection identification and interference counter, can make the drone situ hover, crash landing or return, effectively prevent the drones into the security, low-altitude airspace, with good performance, working distance, no personnel unattended, automatic uav detection counter.

$263570
The integrated countermeasure equipment integrates UAV detection and direction finding and strike functions

The device is portable, highly maneuverable, and not constrained by any terrain, and can be flexibly deployed in all areas that need to be protected against drone intrusion.

The strike gun will not destroy or damage the UAV, its main working principle is to interfere with the UAV's flight control system, signal transmission system, so that the UAV can achieve vertical landing or automatic return, six-channel detection belt direction finding, six-channel interference, can detect and interfere with most of the common signal frequency bands of the UAV, covering more than 95% of the UAV models on the market.

Inquiry
The product is mainly used for drone detection and identification, and can be freely matched with drone countermeasure equipment or decoy equipment to form a defence system

The system passively intercepts the image transmission signal and remote control signal to achieve passive detection, sideways, distance and identification of the UAV

The equipment is mainly used for UAV detection and identification, and can be freely matched with UAV countermeasure equipment or deception equipment to form a defense system.

$7780
The UAV detection and countermeasure system is scientifically combined, which is mainly used for the detection, identification and interference countermeasures of the UAV in the flight state

The system features drone detection and early warning, model identification, and countermeasures for expulsion.

The system adopts the design of detecting and fighting as a whole, scientifically combining the drone detection and countermeasure system, mainly used for detecting and recognizing the drone in flight status and jamming and countermeasure, which can make the drone hovering in place, forced landing or returning to the flight, effectively preventing the drone from entering into the defense zone and guaranteeing the safety of low altitude airspace, with good detection and countermeasure performance, long working distance, no need to be guarded by the personnel, and automatically carrying out the detection and countermeasure of the drone.

$180400
Active phased array radar using MIMO systems and DBF technology can accurately give trajectory information such as azimuth, distance, and velocity of the target

can accurately give the target's azimuth, distance, speed and other track information.

Radar is an active phased array radar that adopts MIMO system and DBF technology. It is mainly used for the detection, warning and target indication of pedestrians and vehicles in the border, perimeter, checkpoint, military base and other key areas, and can accurately give the target's azimuth, distance, speed and other track information.

$58280
The long-term coherent accumulation technology is used to realize the detection of "low, slow and small" high data rate and high Doppler resolution

The digital receiving and transmitting arrays are used to transmit a wide beam and receive DBF to achieve simultaneous multi-beam

Holographic gaze detection radar, also known as full-time and space-time radar and pan-detection radar, adopts digital receiving and transmitting arrays, transmitting a wide beam, receiving DBF to achieve simultaneous multi-beam, and realizing continuous detection of the entire airspace. The long-term coherent accumulation technology is used to realize the detection of "low, slow and small" high data rate and high Doppler resolution. It is mainly used for the detection, alert and target indication of UAVs, birds, and aircraft in key areas such as airports, borders, and coastlines. It can quickly adapt and process the environment and target type, and continuously "flood illuminate" the entire field of view to form a three-dimensional space of the target

Inquiry
Shop by Categories