0
  • High Positioning Accuracy Strong Penetration Indoor Structure Simulation Reconstruction Multi-target Real-time Positioning
  • High Positioning Accuracy Strong Penetration Indoor Structure Simulation Reconstruction Multi-target Real-time Positioning

  • High Positioning Accuracy Strong Penetration Indoor Structure Simulation Reconstruction Multi-target Real-time Positioning

  • Two Dimensional Through Wall Radar CE200 is a two-dimensional positioning penetrating reconnaissance equipment, which can penetrate non-metallic obstacles such as building walls to detect multiple personnel targets behind them, and quickly obtain information such as 2D coordinates, quantity of targets and indoor structure.
  • $ 2090
  • 0 in Stock NowJR-HN45

  • GROUP

    45

  • QUANTITY

  • Contact Online

High Positioning Accuracy

Large bandwidth, long baseline, MIMO architecture, high-resolution design, more accurate positioning

Strong Penetration

Reliable penetration detection of common non-metallic building wall materials

Indoor Structure Simulation Reconstruction

It can simultaneously detect and display strong reflector obstacles such as walls and large-area metal products behind the obstacles.

Multi-target Real-time Positioning

With dynamic and static multi-target real-time detection and two-dimensional positioning capabilities, to obtain

Radar System

Ultra-Wideband Radar with MIMO Architecture

Operation Method

Handheld detection or tripod support remote display and control

Detection Mode

Real-time 2D positioning, simultaneous detection of moving and static multi-targets

You May Be Intersted
It monitors the health and safety status of the received navigation satellite signals, identifies and isolates jamming signals and spoofing signals, and improves the security, stability and anti-attack ability of the timing system

Under the condition of full frequency suppression interference, the signal required for accuracy can still be synchronized

• Automatically switch between synchronization hold mode and denial sustain mode based on the status of input signals. • Real-time monitoring of satellite navigation signals at the installation location of the timing equipment • Automatically isolate non-secure GPS L1 and BDS B1 signals . • Monitor output signal status and log alerts for abnormal output signals. • Capable of remotely receiving command . • Resistant to meaconing and spoofing signals.

$12490
Easy to Install Green Safety Partition Control Integrated Design

The detection unit of the decoy active defense system detects and identifies the upper and lower remote control signals and data image transmission signals of the UAV to realize the intrusion warning of the UAV

The active defense system integrates the functions of radio detection and decoy interference, and a single system has both detection and decoy countermeasures. The detection unit of the decoy active defense system detects and recognizes the up and down remote control signals and data image transmission signals of the drone, and realizes the intrusion warning of the drone. At the same time, the system cooperates with the deception and jamming unit to launch simulated satellite navigation signals to deceive the drone in navigation, so that the drone intruding into the defense area is "lost", which makes the drone unable to fly according to the predetermined path, and realizes the no-flying of the drone area control.

Inquiry
It can make the UAV hover in situ, forced landing or return, effectively prevent the UAV from entering the defense area, and ensure the safety of low-altitude airspace

The system adopts the integrated design of detection and fighting, which combines UAV detection and countermeasure system, and is mainly used for detection, identification and interference countermeasures of UAVs in flight state.

JR-MD1138 for one system (full frequency) by drone detection (spectrum monitoring) system and radio interference system, using the integrated design, combining drone detection and counter system, mainly used for flying state of drones detection identification and interference counter, can make the drone situ hover, crash landing or return, effectively prevent the drones into the security, low-altitude airspace, with good performance, working distance, no personnel unattended, automatic uav detection counter.

$263570
The integrated countermeasure equipment integrates UAV detection and direction finding and strike functions

The device is portable, highly maneuverable, and not constrained by any terrain, and can be flexibly deployed in all areas that need to be protected against drone intrusion.

The strike gun will not destroy or damage the UAV, its main working principle is to interfere with the UAV's flight control system, signal transmission system, so that the UAV can achieve vertical landing or automatic return, six-channel detection belt direction finding, six-channel interference, can detect and interfere with most of the common signal frequency bands of the UAV, covering more than 95% of the UAV models on the market.

Inquiry
All-weather, All-round Composite Passive Positioning Technology High Design MaturityHigh Strong Environmental Learning Ability

The equipment is based on AOA+TDOA composite positioning technology, and has the functions of detection and early warning, model recognition, positioning tracking and trajectory playback of UAVs inside and outside the multi-station range

The full-frequency detection equipment is mainly composed of an array antenna, a radio frequency circuit, a multi-channel synchronous receiver, a GNSS positioning module, etc. The equipment is based on AOA+TDOA composite positioning technology, and has functions such as detection and early warning, model identification, positioning tracking and trajectory playback of drone within and outside the range of multiple stations. Any number of detection devices can be freely expanded according to the scope of the monitoring area.

$3340
The long-term coherent accumulation technology is used to realize the detection of "low, slow and small" high data rate and high Doppler resolution

The digital receiving and transmitting arrays are used to transmit a wide beam and receive DBF to achieve simultaneous multi-beam

Holographic gaze detection radar, also known as full-time and space-time radar and pan-detection radar, adopts digital receiving and transmitting arrays, transmitting a wide beam, receiving DBF to achieve simultaneous multi-beam, and realizing continuous detection of the entire airspace. The long-term coherent accumulation technology is used to realize the detection of "low, slow and small" high data rate and high Doppler resolution. It is mainly used for the detection, alert and target indication of UAVs, birds, and aircraft in key areas such as airports, borders, and coastlines. It can quickly adapt and process the environment and target type, and continuously "flood illuminate" the entire field of view to form a three-dimensional space of the target

Inquiry
Easy to Install 24/7 Control All-in-one Design Multi-band Interference

By emitting electromagnetic waves, it interferes with the satellite navigation signal of the drone or blocks the communication link between the drone and the remote controller, resulting in the drone forcing the drone to land or return

The Photoelectric Interference Integrated Equipment is mainly composed of a jammer unit, an optoelectronic tracking unit and a servo turntable. By transmitting electromagnetic waves, it interferes with the satellite navigation signal of the drone or blocks the communication link between the drone and the remote controller, so as to cause the drone to make the drone forced to land or return. The interference unit supports independent or combined output of multiple interference channels. The photoelectric tracking unit can be configured with visible light and thermal imaging dual-light cameras, with all-day (day/night) tracking and forensics capabilities.

$3620
Multi-device Networking Application Rough Direction Finding Programmable Frequency Band Passive Detection

A portable drone control device is a hand-held integrated detector and jammer. It integrates detection, countermeasures, display and control, and power supply

Portable Drone Control Equipment is a Handheld Integrated Detector & Jammer. It integrates detection, countermeasures, display & control, and power supply all in one. It solved the problem found in the traditional portable jammers which only rely on naked eyes searching for drones with high missing rate. The device is in small size, light weight, and has good mobility, which is suitable for low-altitude protection tasks for important meetings, large events, and daily patrols in fixed places, etc. It can be interconnected with Novasky Anti-drone Defense System command terminal and the integrated command platform through a wireless network at multiple levels and combining with other AUDS equipment, to intelligentlize the information fusion, and unify the platform management. In this case, all resource can be utilized in maximum to construct a new type of supervision network for drones.

$55660
Shop by Categories