0
  • Cut off the connection between the drone and the remote pilot at a distance, forcing the drone to land, hover, or return.
  • Cut off the connection between the drone and the remote pilot at a distance, forcing the drone to land, hover, or return.

  • Cut off the connection between the drone and the remote pilot at a distance, forcing the drone to land, hover, or return.

  • The portable drone countermeasure device is a shield-type design, which is easier to carry, convenient for rapid deployment, can be operated by a single person, and the device has a built-in large-capacity battery, which can last for 45 minutes. The single channel has high power and has a range of more than 2.5 km. It can effectively control the low-altitude multi-rotor UAV on the market, once the equipment starts to strike, the remote control of the UAV can fail, the captured images and videos cannot be transmitted, the GNSS navigation system loses signal, and the connection between the UAV and the remote control is completely cut off, so as to effectively prevent the UAV from entering the defense area and ensure the safety of low-altitude airspace.
  • $ Inquiry
  • 0 in Stock NowJR-MD1172

  • Group

    JR1172

  • QUANTITY

  • Contact Online

Product function: Compulsory control of the drone in flight state, cutting off the connection between the drone and the remote controller at a long distance, and forcing the drone to land, hover or return.

Intervention distance: high-gain directional antenna is adopted, and the working distance can reach 2500 meters. (depending on the environment/model)

Interference frequency band: 900MHz/1.6G/2.4G/5.2G/5.8G can be customized other frequency bands

Applicable scenarios: The device adopts a shield-like design, which can be quickly deployed to public safety, power systems, anti-terrorism fields, military sites, aviation airports, prison guards, event sites and other important places.

You May Be Intersted
Adjustable power, all-in-one design, full-range radio interference Radio jamming and navigation decoy all-in-one device

Radio jamming and navigation decoy all-in-one device JR-HN1187

Integrating full-range jamming equipment and decoy equipment with a new low, small and slow defense equipment, full-band jamming equipment can be software-defined interference sources, which can be customized according to the mainstream UAV frequency band, and support independent or combined output of multiple jamming channels. Full-range jamming equipment interferes with UAV satellite navigation signals or blocks the communication link between UAV and remote control by emitting electromagnetic waves. A decoy device is a radio system based on pseudo-satellite technology, which sends a strong satellite signal with false location information to a drone, and by competing with the satellite signal in orbit, the drone's position system is deceived and driven away or forced to land.

Inquiry
Professional Support High Sensitivity Strong Penetrating Ability Multidimensional Positioning

By detecting faint human vital signs, such as heartbeat and breathing, it can capture the number of survivors trapped in obstacles, 2D and 3D coordinate information, such as rubble and collapsed buildings, to aid in accurate rescue.

Radar life detector 34 is a two-dimensional positioning life detection equipment. By detecting weak human vital signs such as heartbeat and breathing, it can obtain the number， 2D & 3D coordinate information of survivors trapped in obstacles such as ruins and collapsed buildings to assist accurate rescue.

$69600
It can accurately realize sound, light and vibration alarms for commonly used civilian UAVs including quadrotor, fixed-wing, DIY, traversing aircraft, etc. in complex electromagnetic environments, and the false alarm rate is low

In the complex electromagnetic environment, the sound, light and vibration alarms of common civilian UAVs are accurately realized, and the false alarm rate is low

The equipment is mainly used for drone detection and identification, and can be freely matched with drone countermeasure equipment or deception equipment to form a defense system.UAD-ZB01 drone detection equipment adopts self-developed low-power digital-analog hybrid receiver technology as well as advanced power management technology, and adopts external ultra-broadband antenna to accurately detect and identify commonly used civil drones, including quadcopters, fixed wing, DIY, traversing machine and so on, and realize sound, light and vibration alarms. It can realize sound, light and vibration alarms, and at the same time, it can realize extremely low false alarm rate in the complex electromagnetic environment.

$33300
In order to realize the interception control of UAVs that need to use the navigation system for flight control, so that they cannot fly into the protected area, and ensure the low-altitude safety of the area

Prevent drones from flying in sensitive areas and set up "no-fly zones" for drones

Based on the deception of the drone's internal positioning device and the database of restricted and no-fly zones, the drone can react according to its own built-in program strategy. The UAV navigation decoy system transmits simulated satellite navigation signals to navigate and decoy the UAV that intrudes into sensitive areas, so as to realize the defense and control of the UAV. The system mainly injects navigation deception signals into the UAV to realize the control and takeover of the UAV, so that the UAV can be quickly located to a safe area, so that the UAV can fly quickly, get out of the control of the operator, and decoy or set up a no-fly zone to prevent the UAV from flying in sensitive areas and set up a "no-fly zone" for the UAV.

Inquiry
The long-term coherent accumulation technology is used to realize the detection of "low, slow and small" high data rate and high Doppler resolution

The digital receiving and transmitting arrays are used to transmit a wide beam and receive DBF to achieve simultaneous multi-beam

Holographic gaze detection radar, also known as full-time and space-time radar and pan-detection radar, adopts digital receiving and transmitting arrays, transmitting a wide beam, receiving DBF to achieve simultaneous multi-beam, and realizing continuous detection of the entire airspace. The long-term coherent accumulation technology is used to realize the detection of "low, slow and small" high data rate and high Doppler resolution. It is mainly used for the detection, alert and target indication of UAVs, birds, and aircraft in key areas such as airports, borders, and coastlines. It can quickly adapt and process the environment and target type, and continuously "flood illuminate" the entire field of view to form a three-dimensional space of the target

Inquiry
The photoelectric tracking directional jamming all-in-one machine is mainly composed of interference unit and photoelectric tracking unit

which has long-distance, all-day, and 360° all-round UAV target tracking and countermeasure capabilities.

The JR-TSL1185 series UAV photoelectric tracking and directional jamming all-in-one machine is mainly composed of a jammer unit, an electroelectric tracking unit and a servo turntable, which has long-distance, all-day, and 360° all-round UAV target tracking

Inquiry
The optoelectronic tracking system completes the initial alignment of the target according to the target position information provided by the search system, and then searches for the target near the initial alignment area

It is composed of a tracking turntable and a photoelectric chamber, which is equipped with an uncooled infrared focal plane detector, a high-definition visible light camera and an image processing board

The infrared thermal imaging optoelectronic equipment is composed of a tracking turntable and a photoelectric chamber, which is equipped with an uncooled infrared focal plane detector, a high-definition visible light camera and an image processing board. The photoelectric tracking system completes the initial alignment of the target according to the target position information provided by the search system, and then searches for the target near the initial alignment area, and the suspicious target can be confirmed by automatic identification or manual designation in the search process, and then turns into the target automatic tracking working mode, so that the photoelectric sensor boresight axis and the radio frequency interference antenna installed on the tracking turntable can be aimed at the target in real time.

Inquiry
Active Stereo Defense Edge Intelligence Target Intelligent Recognition Multiple Alarms

It is integrated with edge AI deep learning algorithms to achieve real-time alarm and video tracking of mobile intrusion targets in the protection area

Intelligent multi sensor fusion perimeter security system 41, mainly consists of intelligent MMW detecting radar, long range IR camera and 3D vision blind area coverage module in an integrated structure. This system is working based on the MMW detecting radar's continuously scanning of the protection area, integrating with edge AI deep learning algorithm, realized real time alarm and video tracking of the moving intrusion target in the protection area. It is able to intelligently recognize different intrusion target like human and vehicle, filtering out false alarm like animal, trees, rain etc, and supporting unattended operation of perimeter control. It is widely used in high-end perimeter security area such as military, prison, power grid, railway, airport and so on.

$3760
Shop by Categories