0
  • Full-band software-defined design Efficient operation Highly integrated Green and safe UAV full-band jamming equipment JR-TSL1189
  • Full-band software-defined design Efficient operation Highly integrated Green and safe UAV full-band jamming equipment JR-TSL1189

  • Full-band software-defined design Efficient operation Highly integrated Green and safe UAV full-band jamming equipment JR-TSL1189

  • The JR-TSL1189 series of UAV full-band jamming equipment adopts open smart jamming technology, which can suppress the receiving channels of UAV navigation signals, remote control signals and image transmission signals, so that the UAV cannot be located and lose control, so as to achieve the purpose of denying the invasion of UAVs.
  • $ Inquiry
  • 0 in Stock NowJR-TSL1189

  • Group

    JR1189

  • QUANTITY

  • Contact Online

The frequency scanning speed is fast, the antenna energy density is large, and the frequency agility is strong, which is widely used in UAV frequency hopping control signal interference, and the digital modulation source design can quickly generate UAV interference signals of the new system, and the suppression efficiency ratio is significantly improved, and the interference response time is shortened, which is suitable for urban station deployment needs. The jamming equipment uses an intelligent servo system as the motion carrier, and has long-distance and 360° UAV target control capabilities.

Frequency band

0.4-6GHz

Interference distance

The interference radius ≥ 3km (0.1W radiation source), and the effective distance can be adjusted by software

Dry-pass ratio

10:1

Interference angle

360° (gimbal realization)

Interference effective time

≤5s

Gimbal speed

≥60°/s

Connection

Ethernet interface

Power supply mode

AC110~220V

You May Be Intersted
The power advantage is used to make the UAV navigation system receive an analog navigation signal with false position information

Drone decoy jammers emit simulated satellite navigation signals through simulation Drone decoy active defense system

JR-TSL1186 series UAV decoy jammer simulates the satellite navigation signal by simulating the transmission, competes with the satellite signal in orbit, uses the power advantage, makes the UAV navigation system receive the simulated navigation signal with false position information, makes the UAV "lost" in the control area, can not fly according to the predetermined track, can make the UAV produce the effect of driving away, forced landing, or unable to take off.

Inquiry
Quick-Change Capability in Mechanical Hand Equipped with standard mechanical claws (balanced type), knives, scissors, rakes, hooks, and drill bits for fast swapping and multifunctional combat tasks.

Robot Equipped with a 6-DOF Explosive Ordnance Disposal Arm Enables grabbing in any direction

The bomb disposal robot is a bomb disposal robot used for explosive-related work. It can also be used to detect terrain that is difficult for people to reach. It can be used with a variety of accessories, including bomb disposal rope hook locks, explosive destroyers, explosive detectors and remote detonation of explosives, etc. It is widely used in the military, armed police, public security and other bomb disposal needs.

$78000
Provide all-round low-altitude protection anytime, anywhere; Support 4G, 5G wireless communication, free expansion networking Unmanned aerial vehicle (UAV)

It is suitable for small-scale defense such as luxury homes and vehicles,And can be quickly deployedUnmanned aerial vehicle (UAV)

JR-TSL1190 integrated inspection and combat equipment adopts passive detection with highly integrated design, which is suitable for small-scale defense such as luxury houses and vehicles, and can be quickly deployed. It supports 4G and 5G wireless communication, freely expands networking, and can realize wireless grid intelligent management and control for multiple stations.

Inquiry
The radar host is mainly composed of four independent radar fronts and an integrated control box, which is mainly used for the detection, early warning and target indication of UAVs in the monitoring area

and 360 degree all-round coverage.

The radar host is mainly composed of four independent radar fronts and an integrated control box, which is mainly used for the detection, warning and target indication of UAVs in the monitoring area, providing real-time, accurate and continuous air situation and target information for the monitoring system and providing security.

Inquiry
It monitors the health and safety status of the received navigation satellite signals, identifies and isolates jamming signals and spoofing signals, and improves the security, stability and anti-attack ability of the timing system

Under the condition of full frequency suppression interference, the signal required for accuracy can still be synchronized

• Automatically switch between synchronization hold mode and denial sustain mode based on the status of input signals. • Real-time monitoring of satellite navigation signals at the installation location of the timing equipment • Automatically isolate non-secure GPS L1 and BDS B1 signals . • Monitor output signal status and log alerts for abnormal output signals. • Capable of remotely receiving command . • Resistant to meaconing and spoofing signals.

$12490
When the UAV enters the defense area, the suspicious link signal is monitored and identified JR1178 Owl Defense System

Scientifically integrate four types of anti-UAV systems: radio spectrum detection, radar detection, navigation decoy, and electromagnetic interference JR-MD1178 Owl Defense System

Owl anti-UAV defense system uses radar + radio detection + omnidirectional electromagnetic interference + navigation decoy system architecture, through integrated structural design, to build a three-dimensional defense system. The radio spectrum monitoring system collects the surrounding radio signals in real time and scans them according to the configured frequency bands. When the UAV enters the defense area, the suspicious link signal is monitored and identified, and at the same time, it cooperates with the radar detection system to confirm, provides information such as the target working frequency band and distance, and the jamming system transmits electromagnetic suppression signals according to the plan to interfere with the UAV's image transmission and navigation signals; Or through the navigation deception system to transmit low-power regenerative navigation satellite signals (power not more than 10dBm), invade the UAV navigation system, set up a no-fly zone, deceive and confuse the UAV's navigation terminal, so that it cannot fly into the protected area, and ensure the low-altitude safety of the area.

Inquiry
It has the function of combining detection and attack, detection and confrontation, smaller size, lighter weight, full-band detection, and full-band positioning

The device has drone detection, recognition and jamming functions.

JR1115 UAV detection equipment can realize multi-target intrusion alarm, target identification and location, display target motion trajectory and display the position of the flight controller. The system realizes low altitude three-dimensional protection within the radius of the defense area greater than 5000 meters, and has been widely used in government agencies, prison guards, aviation airports, military restricted areas, major activities and other fields.

Inquiry
Detection distance 18km, with black and white list function, the single machine can display the position of the pilot in real time.

It adopts lightweight design, lightweight and portable, simple operation, and is used for UAV detection and identification, early warning and positioning, and trajectory display

Advantages：Detection distance 18km, with black and white list function, the single machine can display the position of the pilot in real time.

Inquiry
Shop by Categories