0
  • Strong Penetration Split Screen Display Structural Simulation Reconstruction Multi-target Real-time Positioning
  • Strong Penetration Split Screen Display Structural Simulation Reconstruction Multi-target Real-time Positioning
  • Strong Penetration Split Screen Display Structural Simulation Reconstruction Multi-target Real-time Positioning
  • Strong Penetration Split Screen Display Structural Simulation Reconstruction Multi-target Real-time Positioning

  • Strong Penetration Split Screen Display Structural Simulation Reconstruction Multi-target Real-time Positioning

  • Portable Two Dimentional Positionaing Through Wall Radar 44 is a light and small two-dimensional positioning and penetrating reconnaissance equipment. It can penetrate non-metallic obstacles such as building walls to detect multiple personnel targets behind it, and quickly obtain information such as the 2D coordinates, number of targets, and indoor structure.
  • $ 1670
  • 0 in Stock NowJR-HN44

  • GROUP

    44

  • QUANTITY

  • Contact Online

Strong Penetration

Reliable penetration detection of common non-metallic building wall materials

Split Screen Display

Supports the simultaneous display of the built-in display and control screen of the radar host and the handheld display and control terminal, which is convenient for front and rear coordinated operations

Structural Simulation Reconstruction

It can simultaneously detect and display strong reflector obstacles such as walls and large-area metal products behind the obstacles

Multi-target Real-time Positioning

With dynamic and static multi-target real-time detection and two-dimensional positioning capabilities, to obtain richer target information

Portability

Small size, light weight, easy to carry, suitable for individual soldiers

Radar System

Ultra-Wideband Radar with MIMO ArchitectureOperation MethodHandheld detection or tripod support remote display and controlDetection ModeReal-time 2D positioning, simultaneous detection of moving and static multi-targets

Display Control Platform

Embedded display & control platform and remote display & control terminal to display synchronously

You May Be Intersted
High power in a single channel, operating range of more than 1.5 km (depending on environment/model)

By transmitting a high-power co-band jamming signal to the UAV, the control signal is suppressed, and the connection between the UAV and the remote controller is cut off from a distance, forcing the UAV to land, hover or return home.

The three-channel drone strike gun has a portable design for rapid deployment and can be operated by one person.It can effectively control the low-altitude multi-rotor UAV on the market, isolate the contact between the UAV and the remote control, force the UAV to hover, land or return, and ensure the safety of the low-altitude airspace. The three-channel UAV strike gun suppresses the UAV control signal by transmitting high-power interference signals in the same frequency band (1.5GHz, 2.4GHz, 5.8GHz).

$13050
Adaptable Low Cost High Refresh Rate Strong Recognition Ability

The RF scan 3D security radar adopts 3D scanning technology, aiming at the three-coordinate three-dimensional space surveillance of low-altitude, ground targets, all-round and high-elevation coverage

The RF scan 3D security radar adopts 3D scanning technology, aiming at the three-coordinate three-dimensional space surveillance of low-altitude, ground targets, all-round and high-elevation coverage, and is mainly responsible for the real-time reconnaissance of aircraft, ground personnel, vehicles and other targets in the surrounding area, finds and tracks the target, and output or report the target information to the specified user. The radar supports three erection modes: fixed, vehicle-mounted and portable, and is flexibly suitable for various low-altitude and ground security application scenarios.

Inquiry
When the UAV enters the defense area, the suspicious link signal is monitored and identified JR1178 Owl Defense System

Scientifically integrate four types of anti-UAV systems: radio spectrum detection, radar detection, navigation decoy, and electromagnetic interference JR-MD1178 Owl Defense System

Owl anti-UAV defense system uses radar + radio detection + omnidirectional electromagnetic interference + navigation decoy system architecture, through integrated structural design, to build a three-dimensional defense system. The radio spectrum monitoring system collects the surrounding radio signals in real time and scans them according to the configured frequency bands. When the UAV enters the defense area, the suspicious link signal is monitored and identified, and at the same time, it cooperates with the radar detection system to confirm, provides information such as the target working frequency band and distance, and the jamming system transmits electromagnetic suppression signals according to the plan to interfere with the UAV's image transmission and navigation signals; Or through the navigation deception system to transmit low-power regenerative navigation satellite signals (power not more than 10dBm), invade the UAV navigation system, set up a no-fly zone, deceive and confuse the UAV's navigation terminal, so that it cannot fly into the protected area, and ensure the low-altitude safety of the area.

Inquiry
Cut off the connection between the drone and the remote pilot at a distance, forcing the drone to land, hover, or return.

The device has a shield-like design for rapid deployment

The portable drone countermeasure device is a shield-type design, which is easier to carry, convenient for rapid deployment, can be operated by a single person, and the device has a built-in large-capacity battery, which can last for 45 minutes. The single channel has high power and has a range of more than 2.5 km. It can effectively control the low-altitude multi-rotor UAV on the market, once the equipment starts to strike, the remote control of the UAV can fail, the captured images and videos cannot be transmitted, the GNSS navigation system loses signal, and the connection between the UAV and the remote control is completely cut off, so as to effectively prevent the UAV from entering the defense area and ensure the safety of low-altitude airspace.

Inquiry
Easy to Install 24/7 Control All-in-one Design Multi-band Interference

By emitting electromagnetic waves, it interferes with the satellite navigation signal of the drone or blocks the communication link between the drone and the remote controller, resulting in the drone forcing the drone to land or return

The Photoelectric Interference Integrated Equipment is mainly composed of a jammer unit, an optoelectronic tracking unit and a servo turntable. By transmitting electromagnetic waves, it interferes with the satellite navigation signal of the drone or blocks the communication link between the drone and the remote controller, so as to cause the drone to make the drone forced to land or return. The interference unit supports independent or combined output of multiple interference channels. The photoelectric tracking unit can be configured with visible light and thermal imaging dual-light cameras, with all-day (day/night) tracking and forensics capabilities.

$3620
High power in a single channel, operating distance of more than 1 km (depending on environment/model)

By transmitting a high-power co-band jamming signal to the UAV, the control signal is suppressed to cut off the connection between the UAV and the remote controller at a long distance

Advantages：Portable design, single-operator control, interference range over 1000 meters (depending on environment). Description：Quickly force drones to land or leave, achieving countermeasures and effectively managing rogue drones. Application Fields：Public safety, power systems, petrochemical, military sites, airports, prison surveillance.

$24980
The detection and early warning of UAVs for long-line-of-sight solves the shortcomings of the current single-soldier anti-UAV operations that are difficult to find targets in time by visual sight

The early warning instrument is used for the detection and early warning of long-range UAVs, and the equipment receives UAV signals

independently developed low-power digital-analogue hybrid receiver technology and advanced power management technology, using external ultra-wideband antenna, detection radius up to 3 km. It can detect and identify more than 90% of common civil UAV models (including quadcopter, fixed-wing, DIY, traverser, etc.), and accurately realise sound, light and vibration alarms, and at the same time, realise a very low false alarm rate of less than 1 time/day in the complex electromagnetic environment.

Inquiry
Device host + terminal operating system. It is mainly used for long-distance UAV detection, which solves the disadvantages of large size, weight, high cost and high power consumption of current UAV detection equipment

Detection radius 2km, low power consumption, small size, light weight, easy to install.

omnidirectional detection is mainly used for the detection of over-the-horizon UAV, which solves the shortcomings of the current UAV detection equipment such as large volume, large weight, high cost and large power consumption. The equipment has the advantages of high cost performance, long-term stability and reliability, no electric radiation, low power consumption, small size, light weight, easy installation and high cost performance.

$13880
Shop by Categories