0
  • Disabling the drone's satellite navigation, wireless remote control, and wireless video transmission links forces the drone to hover in place, land, or return to the original route
  • Disabling the drone's satellite navigation, wireless remote control, and wireless video transmission links forces the drone to hover in place, land, or return to the original route

  • Disabling the drone's satellite navigation, wireless remote control, and wireless video transmission links forces the drone to hover in place, land, or return to the original route

  • The omnidirectional jamming device uses an omnidirectional antenna array to block and interfere with the reception and processing of drone signals, such as video transmission, remote control, and navigation, within a 360° range. This achieves countermeasures like forced return, forced landing, and repelling, allowing for rapid and effective handling of suspicious drones.
  • $ Inquiry
  • 0 in Stock NowJR-MD1127

  • GROUP

    SKU

  • QUANTITY

  • Contact Online

Advantages：Full spectrum jamming, covering 20MHz-6GHz, with customizable frequency bands.

Description：Transmitting omnidirectional radio frequency jamming signals, the system disables a drone's satellite navigation, wireless remote control, and wireless video transmission links, achieving countermeasures such as forced return, forced landing, and repellin

Application Fields：Suitable for three-dimensional defense against "low, slow, and small" drone targets in complex urban electromagnetic environments

Full frequency range interferenceCovers 20MHz-6GHz, programmable frequency bands

360° attackAll-around disposal, wide coverage

Multi-scenario useCan be used as a standalone bomb disposal jammer or as a standalone drone countermeasure device

Long-range countermeasuresEffective distance 1.5~3 kilometers (may vary depending on environment and drone model)

Integrated designTrolley case for easy portability and deployment

Expandable frequency bands/powerCan be customized according to customer requirements for frequency bands and power

You May Be Intersted
Easy to Install Green Safety Partition Control Integrated Design

The detection unit of the decoy active defense system detects and identifies the upper and lower remote control signals and data image transmission signals of the UAV to realize the intrusion warning of the UAV

The active defense system integrates the functions of radio detection and decoy interference, and a single system has both detection and decoy countermeasures. The detection unit of the decoy active defense system detects and recognizes the up and down remote control signals and data image transmission signals of the drone, and realizes the intrusion warning of the drone. At the same time, the system cooperates with the deception and jamming unit to launch simulated satellite navigation signals to deceive the drone in navigation, so that the drone intruding into the defense area is "lost", which makes the drone unable to fly according to the predetermined path, and realizes the no-flying of the drone area control.

Inquiry
Full-band software-defined design Efficient operation Highly integrated Green and safe UAV full-band jamming equipment JR-TSL1189

The products are widely used in important places such as prisons, airports, military bases, power plants and various substations UAV full-band jamming equipment

The JR-TSL1189 series of UAV full-band jamming equipment adopts open smart jamming technology, which can suppress the receiving channels of UAV navigation signals, remote control signals and image transmission signals, so that the UAV cannot be located and lose control, so as to achieve the purpose of denying the invasion of UAVs.

Inquiry
It monitors the health and safety status of the received navigation satellite signals, identifies and isolates jamming signals and spoofing signals, and improves the security, stability and anti-attack ability of the timing system

Under the condition of full frequency suppression interference, the signal required for accuracy can still be synchronized

• Automatically switch between synchronization hold mode and denial sustain mode based on the status of input signals. • Real-time monitoring of satellite navigation signals at the installation location of the timing equipment • Automatically isolate non-secure GPS L1 and BDS B1 signals . • Monitor output signal status and log alerts for abnormal output signals. • Capable of remotely receiving command . • Resistant to meaconing and spoofing signals.

$12490
Lightweight and Portable Unattended Multi-dimensional Accurate Detection Advanced Technology System

Low-altitude surveillance radar is a 3D space surveillance radar for low-altitude, small targets, all-round, high-altitude coverage areas

Low-altitude surveillance radar is 3D space surveillance radar that aims at low-altitude small target, all-around, high elevation coverage area. It is mainly designed for real-time detection and tracking of air vehicle, ground human and vehicle target. Then target information will be transmitted and reported to management and control center. It can be installed by long-term fixed, vehicle mounted and temporary deployment, flexibly apply to different application scenarios.

Inquiry
The measuring terminal uses the radio spectrum monitoring system to passively intercept the image transmission signal and remote control signal between the UAV and the remote control to realize the passive detection of the UAV

The detection end passively intercepts the signal between the drone and the remote control to realize the detection of the drone

The detection terminal uses the radio spectrum monitoring system to passively intercept the image transmission signal and the remote control signal between the UAV and the remote control to realize the passive detection of the UAV. The strike end is mainly for the compulsory control of the UAV or the flying model in the flying state, and the contact between the UAV and the remote control person is cut off at a distance. The interceptor can force the UAV to land or return to the air to ensure the safety of the low-altitude airspace in the region.Cut off all signal communication between the drone and the controller, and the ground controller of the drone can not receive aerial videos and pictures. The drone is unable to locate, forcing the drone to land, hover, or turn back.

$52050
The drone navigation deception system invades the "black flying" drone navigation system by radiating low-power regenerative navigation satellite signals

Effective for most brands of drones, capable of achieving 360 ° all-round defense

The drone navigation deception system invades the "black flying" drone navigation system by radiating low-power regenerative navigation satellite signals, thereby achieving interception and control of drones that need to use navigation systems for flight control, preventing them from flying into protected areas and ensuring low altitude safety in the area.

Inquiry
It has the ability to suppress the receiving channels of UAV navigation signals, remote control signals, and image transmission signals

The three channels are independently powered, and each channel can be flexibly controlled to set interference separately.

JR1126 jammer is a device that interferes with UAV signals. It has the ability to suppress the navigation signal, remote control signal and the receiving channel of the image transmission signal of the UAV, so that the UAV can not locate and lose control, and thus achieve the purpose of preventing the intrusion of the UAV. Suitable for assembly with other equipment systems, can also be used separately for interference installation.

Inquiry
The radar operates in the C-band, using an all-digital active phased array technology system

Good low-altitude detection performance, strong maneuvering tracking capabilities, high measurement accuracy, and low cost.

The radar operates in the C-band, using a fully digital active phased array technology system. Through modular and refined design, it combines adaptive moving target detection, digital T/R, DBF, and integrated analog-digital design techniques to achieve detection and alerting of drones in key monitoring areas.

Inquiry
Shop by Categories