0
FILTER:
It was developed in response to various security threats brought by the "Black Fly" UAV, and was integrated by the radio spectrum monitoring system and the navigation decoy system

Detection range 3000 meters, decoy range 1000 meters.JR-MD1132

JR1132 UAV defense system intercepts UAV and remote control signals through radio spectrum monitoring and navigation decoy technology, and radiates low-power navigation satellite signals to invade the "black fly" UAV navigation system to achieve interception and control.

$ Inquiry
It monitors the health and safety status of the received navigation satellite signals, identifies and isolates jamming signals and spoofing signals, and improves the security, stability and anti-attack ability of the timing system

Under the condition of full frequency suppression interference, the signal required for accuracy can still be synchronized

• Automatically switch between synchronization hold mode and denial sustain mode based on the status of input signals. • Real-time monitoring of satellite navigation signals at the installation location of the timing equipment • Automatically isolate non-secure GPS L1 and BDS B1 signals . • Monitor output signal status and log alerts for abnormal output signals. • Capable of remotely receiving command . • Resistant to meaconing and spoofing signals.

$ 12490
The UAV detection and countermeasure system is scientifically combined, which is mainly used for the detection, identification and interference countermeasures of the UAV in the flight state

The system features drone detection and early warning, model identification, and countermeasures for expulsion.

The system adopts the design of detecting and fighting as a whole, scientifically combining the drone detection and countermeasure system, mainly used for detecting and recognizing the drone in flight status and jamming and countermeasure, which can make the drone hovering in place, forced landing or returning to the flight, effectively preventing the drone from entering into the defense zone and guaranteeing the safety of low altitude airspace, with good detection and countermeasure performance, long working distance, no need to be guarded by the personnel, and automatically carrying out the detection and countermeasure of the drone.

$ 180400
The device is composed of a detection system, a jamming system, and an operation terminal tablet, and is a highly integrated and portable anti-drone system

Portable design for rapid deployment to anti-drone sites

The device is composed of a detection system, an jamming system, and an operation terminal tablet, and is a highly integrated and portable anti-drone system. The trolley box design is convenient for rapid deployment of anti-drone sites, and it is flexible for various environments. The system integrates drone detection and jamming countermeasures, whether it is in the city, in the field or in extreme weather conditions, it can be quickly deployed and started work.

$ Inquiry
Disabling the drone's satellite navigation, wireless remote control, and wireless video transmission links forces the drone to hover in place, land, or return to the original route. Compared to omnidirectional jamming, the strike is accurate

Compared to omnidirectional interference, the targeting is more precise, the impact on the surrounding environment is minimal, and the reliability is higher.

The device is mainly used for signal interference of UAV, and can be combined with the detection equipment of UAV to form an intelligent linkage defense system.

$ 97110
Disabling the drone's satellite navigation, wireless remote control, and wireless video transmission links forces the drone to hover in place, land, or return to the original route

Full spectrum jamming, covering 20MHz-6GHz, with customizable frequency bands

The omnidirectional jamming device uses an omnidirectional antenna array to block and interfere with the reception and processing of drone signals, such as video transmission, remote control, and navigation, within a 360° range. This achieves countermeasures like forced return, forced landing, and repelling, allowing for rapid and effective handling of suspicious drones.

$ Inquiry
It has the ability to suppress the receiving channels of UAV navigation signals, remote control signals, and image transmission signals

The three channels are independently powered, and each channel can be flexibly controlled to set interference separately.

JR1126 jammer is a device that interferes with UAV signals. It has the ability to suppress the navigation signal, remote control signal and the receiving channel of the image transmission signal of the UAV, so that the UAV can not locate and lose control, and thus achieve the purpose of preventing the intrusion of the UAV. Suitable for assembly with other equipment systems, can also be used separately for interference installation.

$ Inquiry
High power in a single channel, operating range of more than 1.5 km (depending on environment/model)

By transmitting a high-power co-band jamming signal to the UAV, the control signal is suppressed, and the connection between the UAV and the remote controller is cut off from a distance, forcing the UAV to land, hover or return home.

The three-channel drone strike gun has a portable design for rapid deployment and can be operated by one person.It can effectively control the low-altitude multi-rotor UAV on the market, isolate the contact between the UAV and the remote control, force the UAV to hover, land or return, and ensure the safety of the low-altitude airspace. The three-channel UAV strike gun suppresses the UAV control signal by transmitting high-power interference signals in the same frequency band (1.5GHz, 2.4GHz, 5.8GHz).

$ 13050
By emitting electromagnetic waves in specific frequency bands to interfere with UAVs, disrupt flight control and signal transmission systems

Portable design, single-operator control, interference range over 1000 meters (depending on environment)

Handheld anti-drone device. Interferes with drones by emitting electromagnetic waves in specific frequency bands, disrupting flight control and signal transmission systems. Quickly forces drones to land or leave, achieving effective control over rogue drones.

$ 19425
High power in a single channel, operating distance of more than 1 km (depending on environment/model)

By transmitting a high-power co-band jamming signal to the UAV, the control signal is suppressed to cut off the connection between the UAV and the remote controller at a long distance

Advantages:Portable design, single-operator control, interference range over 1000 meters (depending on environment). Description:Quickly force drones to land or leave, achieving countermeasures and effectively managing rogue drones. Application Fields:Public safety, power systems, petrochemical, military sites, airports, prison surveillance.

$ 24980
The measuring terminal uses the radio spectrum monitoring system to passively intercept the image transmission signal and remote control signal between the UAV and the remote control to realize the passive detection of the UAV

The detection end passively intercepts the signal between the drone and the remote control to realize the detection of the drone

The detection terminal uses the radio spectrum monitoring system to passively intercept the image transmission signal and the remote control signal between the UAV and the remote control to realize the passive detection of the UAV. The strike end is mainly for the compulsory control of the UAV or the flying model in the flying state, and the contact between the UAV and the remote control person is cut off at a distance. The interceptor can force the UAV to land or return to the air to ensure the safety of the low-altitude airspace in the region.Cut off all signal communication between the drone and the controller, and the ground controller of the drone can not receive aerial videos and pictures. The drone is unable to locate, forcing the drone to land, hover, or turn back.

$ 52050
It can effectively control the low-altitude multi-rotor UAV on the market, and once the equipment starts the strike, the remote control of the UAV can fail, and the captured images and videos cannot be transmitted back

The device is composed of a detection system, a jamming system, and an operation terminal tablet, and is a highly integrated and portable anti-drone system

The gun-type UAV removal equipment is mainly used for compulsory control of the UAV or the flying model in the flight state, launching suppression control signals to the UAV, interfering with the data link and positioning system, blocking the communication and navigation signals between the UAV and the remote control, forcing the UAV to hover in place, automatically land or return.

$ 12500
The integrated countermeasure equipment integrates UAV detection and direction finding and strike functions

The device is portable, highly maneuverable, and not constrained by any terrain, and can be flexibly deployed in all areas that need to be protected against drone intrusion.

The strike gun will not destroy or damage the UAV, its main working principle is to interfere with the UAV's flight control system, signal transmission system, so that the UAV can achieve vertical landing or automatic return, six-channel detection belt direction finding, six-channel interference, can detect and interfere with most of the common signal frequency bands of the UAV, covering more than 95% of the UAV models on the market.

$ Inquiry
It can accurately realize sound, light and vibration alarms for commonly used civilian UAVs including quadrotor, fixed-wing, DIY, traversing aircraft, etc. in complex electromagnetic environments, and the false alarm rate is low

In the complex electromagnetic environment, the sound, light and vibration alarms of common civilian UAVs are accurately realized, and the false alarm rate is low

The equipment is mainly used for drone detection and identification, and can be freely matched with drone countermeasure equipment or deception equipment to form a defense system.UAD-ZB01 drone detection equipment adopts self-developed low-power digital-analog hybrid receiver technology as well as advanced power management technology, and adopts external ultra-broadband antenna to accurately detect and identify commonly used civil drones, including quadcopters, fixed wing, DIY, traversing machine and so on, and realize sound, light and vibration alarms. It can realize sound, light and vibration alarms, and at the same time, it can realize extremely low false alarm rate in the complex electromagnetic environment.

$ 33300
The detection and early warning of UAVs for long-line-of-sight solves the shortcomings of the current single-soldier anti-UAV operations that are difficult to find targets in time by visual sight

The early warning instrument is used for the detection and early warning of long-range UAVs, and the equipment receives UAV signals

independently developed low-power digital-analogue hybrid receiver technology and advanced power management technology, using external ultra-wideband antenna, detection radius up to 3 km. It can detect and identify more than 90% of common civil UAV models (including quadcopter, fixed-wing, DIY, traverser, etc.), and accurately realise sound, light and vibration alarms, and at the same time, realise a very low false alarm rate of less than 1 time/day in the complex electromagnetic environment.

$ Inquiry
The system passively intercepts the image transmission signal and remote control signal to achieve passive detection, sideways, distance and identification of the UAV

Realize the passive detection of UAVs, detect the position, distance and altitude of UAVs, and identify models.

It is used for the detection and early warning of UAVs beyond the visual range, which solves the disadvantages of the current UAVS detection equipment, such as large size, high weight, high cost and high power consumption. The system passively intercepts the picture transmission signal and remote control signal between the UAVs and the remote control, and realizes the passive detection and early warning of UAVs. In the flat and unobserved open area of DJI Spirit 4, the farthest detection and positioning horizontal distance of the drone reaches a radius of 7.5KM.

$ 124900
The product is mainly used for drone detection and identification, and can be freely matched with drone countermeasure equipment or decoy equipment to form a defence system

The system passively intercepts the image transmission signal and remote control signal to achieve passive detection, sideways, distance and identification of the UAV

The equipment is mainly used for UAV detection and identification, and can be freely matched with UAV countermeasure equipment or deception equipment to form a defense system.

$ 7780
It has the function of combining detection and attack, detection and confrontation, smaller size, lighter weight, full-band detection, and full-band positioning

The device has drone detection, recognition and jamming functions.

JR1115 UAV detection equipment can realize multi-target intrusion alarm, target identification and location, display target motion trajectory and display the position of the flight controller. The system realizes low altitude three-dimensional protection within the radius of the defense area greater than 5000 meters, and has been widely used in government agencies, prison guards, aviation airports, military restricted areas, major activities and other fields.

$ Inquiry
Detection distance 18km, with black and white list function, the single machine can display the position of the pilot in real time.

It adopts lightweight design, lightweight and portable, simple operation, and is used for UAV detection and identification, early warning and positioning, and trajectory display

Advantages:Detection distance 18km, with black and white list function, the single machine can display the position of the pilot in real time.

$ Inquiry
Device host + terminal operating system. It is mainly used for long-distance UAV detection, which solves the disadvantages of large size, weight, high cost and high power consumption of current UAV detection equipment

Detection radius 2km, low power consumption, small size, light weight, easy to install.

omnidirectional detection is mainly used for the detection of over-the-horizon UAV, which solves the shortcomings of the current UAV detection equipment such as large volume, large weight, high cost and large power consumption. The equipment has the advantages of high cost performance, long-term stability and reliability, no electric radiation, low power consumption, small size, light weight, easy installation and high cost performance.

$ 13880
804 上一页 1 2 3 4 下一页 跳转